Setting The Time; Switching Demonstration Screen Display - Eclipse CD8445E Owner's Manual

Various Settings
Turn the [SEL] button to select
3
ON or OFF.
The selected item will be highlighted.
4
Press the [SEL] button.
The selected settings will take effect.
5
Press the [RTN] button.
At this time, other adjustments can
also be made in function mode.
Press the [FUNC] or [RTN] button
6
to exit function mode.
ATTENTION
The clock display can also be turned on
and off by pressing the [6] button while
the power is turned off.

Setting the time

This receiver uses the 12-hour display notation.
Turn the [SEL] button to select
1
Clock Adjust.
2
Press the [SEL] button.
The clock adjustment
activated.
Press the [SEL] button to display
3
the item to be selected for
adjustment.
Hours or minutes will be switched
each time the button is pressed.
4
Turn the [SEL] button.
Turn to the right:
Turns the time forward.
Turn to the left:
Turns the time back.
5
6
Switching demonstration
screen display
You can set the demonstration screen display
to appear or not appear when the power is
turned on.
When the power turns on, the various
demonstration screens such as the audio
operation screens and motion picture screens
will appear repeatedly in the following order.
If you press a button while the demonstration
screens are being displayed, the demonstration
screens will be cancelled and the audio
operation screen will be displayed. If you do not
operate the status display function within 15
seconds, the display will return automatically to
the demo screen.
1
2
mode is
3
4
5
6
202
Press the [RTN] button.
At this time, other adjustments can
also be made in function mode.
Press the [FUNC] or [RTN] button
to exit function mode.
Turn the [SEL] button to select
the Demo.
Press the [SEL] button.
The Demo ON/OFF
activated.
Turn the [SEL] button to select
ON or OFF.
The selected item will be highlighted.
Press the [SEL] button.
The selected settings will take effect.
Press the [RTN] button.
At this time, other adjustments can
also be made in function mode.
Press the [FUNC] or [RTN] button
to exit function mode.
mode is