Export Sonic Immersion System Dealer Installation Guide
Figure 32. Removing Nut from Ground Terminal
3.
Now place the green ground wire that you just inserted into
the lower control box over the screw, replace 5/16" (7.9
mm) nut, and secure with 5/16"(7.9 mm) nut driver or
wrench.
4.
Connect the white and black wires to the pins as outlined in
Table 5.
Board Description
MSPA-1-CE (240
V, 50Hz)
International
MSPA-MP-CE (240
V, 50 Hz)
International
Table 5 Pin Connectors
Pin Connections
Green – ground
White – P-98
Black – P-44
Green – ground
White – P-80
Black –P-39
31