Numark CDX Quick Start Owner's Manual page 6

24. LCD Display- indicates all the functions as they are occurring with the CD.
25. Display/Back
Display - switches the Time Modes on the display between Elapsed Playing Time, Remaining Time on the
track and Remaining Time on the entire CD.
Back - allows you to step back when using the menu options.
26. Store/Recall
Store - will store all Cue Points for the CD when this button his held for 1 second (one Cue Set can be
stored per CD)
Recall - will recall all Cue Points for the CD.
27. Menu – is used for setting track order and various special commands.
display while using select knob to implement the desired changes. These changes will be stored and
retained on unit power off.
Program – Allows you to play back a sequence of tracks on a CD. Follow the onscreen directions
after entering this mode.
Relay – By turning this on, the unit will automatically start Playing when another unit attached via
a 1/8" relay cable stops playing. In Single Mode, this would be at the end of each track. In
Continuous Mode this would be after a complete CD has played.
Interlock – This synchronizes the beats of two units. The units need to be interconnected by MIDI
cables plugged into the IN and OUT of each unit respectively. Activating this will cause the second
unit to align itself to the first unit. The first unit can also be a drum machine or other MIDI Device.
33/45 – This sets the default normal speed of the platter to either 33RPM or 45RPM depending
upon your desired use. When set to Default, the music will be normal at 0% no matter the platter
speed. If the 33/44 button is toggled, then the speed of the music and platter will change
accordingly for effect.
Buffer - This gives an option for eliminating the dead space at the end of tracks. The unit already
automatically removes dead space at the beginning of tracks. End-of-track dead space elimination
is useful if you are playing a CD continuously and want to eliminate all the gaps between songs.
Utility –
Sleep Mode - The unit will automatically enter sleep mode after 15 minutes of
o
inactivity. In this mode, playback will still start instantly from buffer, however, the
laser will be off to extend its life. If this feature is undesirable, then it can be turned
off.
Remote Type (Fader, On/On, On/Off) – allows you to set the unit to
o
remotely start via a fader-start mixer or switch. Fader - allows you
to use an industry-standard fader-start mixer by attaching an 1/8"
fader-start cable between the unit and your mixer. Typically, if you
move the crossfader toward the active channel, the attached CD player will play. When
it is moved awa,y the unit will Cue or Pause, depending upon the CD player setting.
Some mixers allow the input channel also to start the player. On/On - allows you to use
a momentary-type switch to start the unit. On/Off – allows you to use a locking switch
to start and stop the unit.
well.
Digital out (audio/CDG)
o
Calibration – allows you to recalibrate your pitch slider, vinyl encoders, and effect
o
wheel by following the on-screen instructions.
Version – shows all software versions in the unit.
o
Reset – allows you to reset the machine options to the factory defaults.
o
Auto CD Insert – sets the unit to automatically bring the CD into the unit after a
o
predefined period. This can be turned off if not desired.
Reverse Mode – Allows the Reverse function activate instantly, or to be delayed based upon the
actual platter motion.
28. Single- toggles the unit to play back just one track at a time (Single) or play continuously through all
tracks and then start over repeating the CD infinitely (Continuous).
Follow the directions on the
This will work with some older style fader-start mixers as