Numark CDN 33 Manual

Numark CDN 33 Manual

Professional dual cd player

Advertisement

Quick Links

CDN 33
PROFESSIONAL DUAL CD PLAYER
MANUAL
©2001
Industries
http://www.numark.com

Advertisement

Table of Contents
loading

Summary of Contents for Numark CDN 33

  • Page 1 CDN 33 PROFESSIONAL DUAL CD PLAYER MANUAL ©2001 Industries http://www.numark.com...
  • Page 2: Safety Instructions

    Grounding or Polarization - Precautions should be taken so that the grounding or polarization means built into the CD player is not defeated. Internal/External Voltage Selectors - Internal or external voltage selector switches, if any, should only be reset and re-equipped with a proper plug for alternative voltage by a qualified service technician.
  • Page 3: Introduction And Registration

    CD mixing with the same ease and creativity that you have enjoyed with records. Please take a few moments to familiarize yourself with the CDN 33 by reading the following information before attempting to operate the unit.
  • Page 4: Table Of Contents

    CDN 33 Safety Instructions Introduction and Registration Set-up & Connections Description of the Features Face Panel Rear Panel Display Basic Operation Play, Pause and Cue Operations Track Selection, Programming, Relay Play Matching the Tempo Beat Matching Using Pitch Bend Example of Mixing...
  • Page 5: Set-Up & Connections

    3) If the VOLTAGE SELECTOR switch does not move smoothly contact a qualified serviceman. DIGITAL OUTPUTS: This CD player is specially equipped with digital outputs. The format is type 2, form 1, also known as S/PDIF (Sony/Phillips Digital Interface Format). When the digital output is used the variable pitch slider and pitch bend buttons or pitch wheel should not be used.
  • Page 6: Face Panel

    CDN 33 FRONT PANEL FEATURES 1. Open/Close: Press to load or eject the disc. The tray will not open if a disc is in play. The tray door will automatically close in 30 seconds if left open. This is to protect the tray from accidental damage while open.
  • Page 7 21. Power Switch: Turn on and turn off the machine with this button. The unit should always be shut down with this button first before any external power is removed. ©2001 Numark Industries - The Leader in DJ Technology - 7 - CDN 33 http://www.numark.com...
  • Page 8: Rear Panel

    24. Voltage Selector - Set this switch to the voltage for your location. 25. RCA Audio Connectors - Connect your CD player to your mixer from this line level output. 26. Digital Output - The format is type 2, form 1, also known as S/PDIF (Sony/Phillips Digital Interface Format). In order to use the digital output you should not use variable pitch slider and the pitch bend buttons.
  • Page 9: Display Features

    MINUTES - Shows the minutes elapsed or remaining depending on mode setting. SECONDS - Shows the seconds elapsed or remaining depending on mode setting. FRAMES - The CD Player breaks down a second into 75 frames for accurate cueing. This shows the frames elapsed or remaining depending on mode setting.
  • Page 10: Play, Pause And Cue Operations

    EDITING CUE POINT When the jog wheel is turned while a cue point is set, a new cue point can be located. The CD player will repeatedly play small parts of the CD as you move it to the desired position. By pressing “PLAY/PAUSE” then “CUE” you can confirm that this new cue point is desirable.
  • Page 11: Track Selection, Programming, Relay Play

    If the unit is in CONTINUOUS mode the play signal will be sent at the end of the full CD. Two CDs will play continuously, alternating from unit to unit. ©2001 Numark Industries - The Leader in DJ Technology...
  • Page 12: Matching The Tempo

    Match the tempo by monitoring the music of both PLAYER 1 and PLAYER 2 by ear and adjusting the pitch. When the tempo of the music of the selected CD player is slow compared to the tempo of the other player, move the slider to the “+”...
  • Page 13: Example Of Mixing

    PLAYER 2 Press the Pause button of Check you new cue point Listen with the monitor and Do a MIX! With a matching downbeat ©2001 Numark Industries PLAYER 1 OPEN/CLOSE button. PLAYER 2 OPEN/CLOSE button. PLAYER 2 Press search and rotate PLAYER 2.
  • Page 14: Fader Start, Remote Switch Start

    Typically if you press the switch once, the attached CD player will activate. When it is pressed again the unit will cue or pause depending upon CD player setting.
  • Page 15: Troubleshooting Guide

    Digital Output GENERAL Dimensions: Weight: Power Supply: Power Consumption: ©2001 Numark Industries Possible Cause Poor power plug connection at the AC outlet or IEC Power cord loose from rear of unit The disc is loaded upside down The disc is too dirty...
  • Page 16: Warranty

    Professional Disc Jockey Products What is covered and for how long? NUMARK INDUSTRIES LCC ("NUMARK") warrants to the original purchaser that NUMARK'S DJ Mixers, Amplifiers, CD players, turntables, preamplifiers, beatkeepers, equalizers, microphones, headphones, and all other accessories are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase from an authorized NUMARK dealer and continuing for the following period of time after that date for (1) Year.

Table of Contents