Managed Layer 2+ Stackable Switches FSM7226RS and FSM7250RS Hardware Installation Guide
FSM7226RS Rear Panel
The rear panel has two stacking ports, a console port, redundant power supply connector, and a
standard AC power receptacle for the supplied power cord.
Stacking ports
Console port
Figure 1-2
FSM7250RS Front Panel and LEDs
The following figure shows the front panel of the managed switch. The front panel contains LEDs,
a RST (reset) button, RJ-45 jacks, and copper/fiber combo ports.
RST
(reset button)
LEDs
Figure 1-3
1-2
Power receptacle
Redundant
power supply connector
RJ-45 jacks
v1.0, October 2008
Copper/fiber
combo ports
Introduction