Table of Contents
Advertisement
Managed Layer 2+ Stackable Switches FSM7226RS and FSM7250RS Hardware Installation Guide
•
Observe extension cable and power strip ratings. Make sure that the total ampere rating of all
products plugged into the extension cable or power strip does not exceed 80 percent of the
ampere ratings limit for the extension cable or power strip.
•
To help protect your system from sudden, transient increases and decreases in electrical power,
use a surge suppressor, line conditioner, or uninterruptible power supply (UPS).
•
Position system cables and power cables carefully; route cables so that they cannot be stepped
on or tripped over. Be sure that nothing rests on any cables.
•
Do not modify power cables or plugs. Consult a licensed electrician or your power company
for site modifications.
•
Always follow your local and national wiring rules.
•
Move products with care; ensure that all casters and stabilizers are firmly connected to the
system. Avoid sudden stops and uneven surfaces.
1-6
v1.0, October 2008
Introduction
Advertisement
Table of Contents
Troubleshooting
