Telnet Command - Compaq 158222-B21 - StorageWorks Fibre Channel SAN Switch 8 Release Note

8 Compaq StorageWorks Fibre Channel SAN Switch 16 Release Notes

Telnet Command

qlPortShowAll
ssn
The qlPortShowAll command displays the following QuickLoop port
information for each port:
QuickLoop Mode
Enabled—QuickLoop mode enabled
Disabled—QuickLoop mode disabled
Looplet State
Online—Completed loop initialization
Lipped—NL_port lipped
Lipping—FL_port lipped
Initializing—Loop initialization in progress
Bypassed—Looplet being bypassed
Error—Error found in this looplet
Offline—Looplet offline
Fabric—OLD_PORT state
Not in QuickLoop Mode—Port is not in QuickLoop mode
The Fibre Channel SAN Switch has a software readable serial number that can
be accessed by using the Telnet command "ssn." Switches that have been
upgraded to firmware v2.1.7 will not display the software readable serial
number when this command is given, instead the switch World Wide Name
(WWN) will display. If you have a switch with firmware v2.1.7 preinstalled
and the switch displays the WWN instead of the software readable serial
number, contact customer service.