Using The Java Plug-In - Compaq 158222-B21 - StorageWorks Fibre Channel SAN Switch 8 Release Note

Using the Java Plug-In

The proper execution of the Web Management Tools v2.1 application requires
that Java Plug-In is installed on your workstation. Web Management Tools
v2.1 requires the Java Plug-In version based on Java 1.2 (also known as Java
2) to operate correctly. The Java Plug-In is similar to other plug-ins used on
your browser such as Real Audio, Adobe Acrobat, and Macromedia Director.
Once Java Plug-In is installed its use is invisible.
Release Files
V2.1.7 dated 6/1/00
The release files for the Fibre Channel SAN Switch firmware, dated 6/1/00,
include:
MIB Files for BFOS v2.1.7 are the same as v2.1
q
femib.smiv1 4/16/99 is now v2_1FE.mib
q
swmib.smiv1 4/16/99 is now v2_1SW.mib
q
swtrap.smiv1 4/16/99 is now v2_1TRP.mib
New Front Panel Commands and
Changes
Four new options have been added to the front panel commands:
Disable Read Link Status (RLS) Probing
Ethernet Link Mode
Suppress Class F Traffic
Quick Soft Initialization
Disable RLS Probing
When RLS Probing is not selected (enabled or "0"), the switch port will issue
RLS Extended Link Service to the attached devices every four seconds to
collect link status data. Otherwise, RLS will not be sent to the devices. RLS
Probing is selected by default (disabled or "1".)
Compaq StorageWorks Fibre Channel SAN Switch 16 Release Notes 5