Starting Recording - Yamaha POCKETRAK 2G - 2 GB Digital Player Reference Manual

Recording

Starting recording

Do not remove the battery during recording.
You can adjust the direction of the built-in microphones to suit your recording situation
1.
Press the FOLDER/INDEX button to select a folder (A, B, C, D or S).
Hint:
The A, B, C, D and S folders store audio files (such as a conversation, for example)
recorded via the recorder's microphones. The L folder stores music recorded from a con-
nected external device, such as a CD player. The M folder stores music files transferred
from a computer.
For detailed explanation of the folders, refer to
Note:
· Press and hold down the FOLDER/INDEX button for at least two seconds to select the S
folder.
· Do not select the L or M folder. The L and M folders are not VOICE folders. If you select
one of them, built-in microphone recordings will be recorded automatically to the A
folder. However, if the A folder is full, no additional built-in microphone recordings are
possible (until you delete some recordings).
· The unit can record up to 99 files in any one folder (A, B, C, D or S). "FILE FULL"
appears if you attempt to record a 100th file in any folder.
2.
Press the PAUSE/REC button.
The recording LED lights up and recording starts.
Elapsed recording time
Remaining recording time
Note:
· When MIC ALC is set to OFF, the recorder enters the recording standby mode. Press the
PAUSE/REC button again to start recording.
· With some files, the elapsed recording time displayed on the LCD may differ from the
actual elapsed time.
10
POCKETRAK 2G Reference Manual
page 41.
File number
Total file number
(page 5).