Recording
Adjusting the microphone sensitivity
The level meter moves to left or right as the volume level of the sound source
changes.
If the sensitivity level is low:
If the level meter moves only very slightly, raise the micro-
phone sensitivity by pressing the Y button so that the
level meter will move moderatley to the right.
If the sensitivity level is high:
If the level meter frequently moves all the way to the right
and the REC/PEAK LED lights up, recorded sounds may be
distorted. Press the T button to lower the microphone
sensitivity.
If the sensitivity level is optimum:
The microphone sensitivity is optimum when the meter indicates
a "-6" level consistently, without deflecting all the way to the
right at loud sounds.
Note:
· You cannot change the microphone sensitivity setting while the recorder is stopped.
· At a level of zero (0), the recording will be silent.
· Turn on the MIC ALC function when you record any sound source other than music.
14
POCKETRAK 2G Reference Manual
SP 15 MIC
SP 23 MIC
SP 23 MIC