Security; Ssh; 802.1X - Dell PowerConnect 5324 Release Note

Security

SSH

Title
Serial connection is lost after 4
concurrent SSH sessions
Deleting SSH generated crypto key

802.1x

Title
802.1x authentication does not work
when EAP packets are transmitted
with a VLAN tag = 0
Incorrect information displayed in
"Authenticated Users" Web-based
management page
System Firmware Version 2.0.0.39
PowerConnect 5324 Release Notes
Description
An attempt to open a forth SSH session will cause the serial
connection to the device to become inactive.
Workaround: Do not open more than three concurrent SSH
sessions.
Once a key is generated (RSA or DSA), a key cannot be
removed.
Workaround: Erase the flash image and reload.
Description
When 802.1x packets are transmitted with VLAN tag = 0, port
cannot authenticate.
Workaround: Do not use VLAN 0 for network configurations.
Switch default VLAN is 1.
Incorrect information displayed in "Authenticated Users" Web-based
management page with no relevancy to 802.1x status (enabled or
disabled)
Workaround: Use CLI for "Authenticated Users" status.
Subject to Change Without Notice
ID
24773
25047
ID
23215
25857
Page 3