MSI Eclipse PLUS - Motherboard - ATX Software User's Manual page 14

Software Application Guide Software Application Guide
Applying parameters
You can do all the above mentioned adjustments under each mode, after that, please
click the "Apply" button to execute the configured setting without rebooting the system;
or you can click the "Save" button to save the adjustments for future use.
Important
Every time you shut down the system, the configured setting will be restored to the
factory default. If you want to use the saved settings, you have to load it every time by
clicking the "Load" button.
Manual Overclocking
You can adjust the CPU base clock, CPU ratio and its related voltages to create an
even better overclocking environment, after that, please click the "Apply" button. When
prompted to reboot your computer, click OK to reboot. You can also click the "Save" but-
ton to save the adjustments for future use. You may refer to the following pictures.
Notification
A good CPU cooler is suggested when users have to overclock manually, the key to
overclocking through Control Center is to increase the smallest increments allowable
on related items.
8
Adjust CPU Ratio, click Apply, it will
prompt a message for reboot.