Software Application Guide
Software Application Guide
System Requirement
In order to run Winki III, the following hardware and is required
■
At least 2GB memory
■
DVD Drive
Important
If you are using the Intel SATA 6Gb/s or Marvell 88SE9128 chip, when you use Live
Update or HDDBackup utility under Winki III, please change IDE_Mode to AHCI_Mode
in BIOS setting.
Entering Winki III
You can enter Winki III OS from attached DVD or your USB key installed with Winki III
OS. Please follow the steps below:
Entering the Winki III from the DVD Drive
1.
Put the attached DVD to the DVD drive.
2.
Reboot and enter the BIOS by pressing "Delete" under POST screen.
3.
Select to boot from DVD drive and reboot.
4.
The Winki III boot screen appears as below.
5.
Select "Winki, full-featured Winki" and press "Enter".
Select this option
6.
Then, you will enter Winki.
16