Table of Contents
Advertisement
1/8"(3.2mm)
3/16"(5mm)
Min. 7/8"(22mm)
7/32"(5.5mm)
Wall mounting screw
Min. 21/32"(16.5mm)
Wall surface
Wall surface
Mounting on the wall
Preparation:
•
Remove the stand from the main unit:
Grip the top of the unit with one hand and grip the stand with the
other hand.
Slowly but firmly pull the main unit off its stand.
•
Use appropriate screws (not supplied). See the illustration on
the right for
3/8"(9mm)
more details on the size and type of screws.
1.
First of all, cut out the template on the last page of the instruction
manual.
Fix the template on the wall where you want to hang the appliance
and drive
two screw holes into the wall with a distance of 100mm between
them, then
remove the template.
2.
Drive the appropriate screws into the holes and tighten them,
making sure
that you leave 5.5 mm between the screw head and the wall.
Ensure that the
Pattern Paper
for main unit
wall and the screws can support a weight of 1.0 kg.
3. Hook the main unit on the screw heads and make sure it is secure.
CAUTION:
Handle the appliance carefully when mounting it on the wall.
Mounting screws are not supplied. Use the appropriate screws.
•
Check the two mounting screws are properly fixed to the wall
•
and that the main unit is firmly attached
Select a good location. In the wrong location, accidents may
•
occur or the unit may get damaged.
Avoid placing above a bed, sofa, water tank, sink or in a hallway.
•
GB - 5
Advertisement
Table of Contents
