Table of Contents
Advertisement
Current Chapter
Total Chapter
TT
07/36
CH
1/41
DVD
Total Title
Current Title
Current Track
TRK
02/16
CD
Total track
PROGRAM
PROGRAM
2. GOTO function
This function allows you to select any point on the disc and to start
playback from this point.
00:03:12
2.1 Selecting a Specific Title/Chapter for a DVD or track for a
Time
CD/VCD
You can select a specific title/chapter/track and start playback from this
point by directly selecting it.
00:03:12
Press GOTO.
•
Time
Press
•
corresponding number key.
Press OK to confirm. The unit will then start playback from the
•
selected position.
Note: Press CLEAR to cancel a selection.
2.2 Locating a specific time
A specific time can be selected by directly entering the time (hours,
minutes,seconds).
Press GOTO.
•
Press
•
Using the number keys, directly enter the time when playback
•
should start.
- The first two digits are for the hours.
- The next two digits are for the minutes.
- The last two digits are for the seconds.
After entering the time, press OK to confirm. The unit will then start
•
playback from the selected time.
Notes:
Some discs may not allow use of this function.
•
Some scenes may not be located as precisely as specified.
•
This method for accessing a specific location is available only within
•
the current title of the DVD or current track of the CD.
For VCDs, this function only works if PBC is off.
•
Press CLEAR to delete any mistakes.
•
3. Programming playback
Contents of the disc can be played in a selected order.
Press the PLAYMODE button.
•
When "MODE", is highlighted, use
•
Then press OK to confirm.
Note: During VCD/SVCD playback, the function is only available when
PBCis OFF.
3.1 DVD Programming
Chapter
Enter the title numbers in
•
Title
buttons to highlight chapter and enter the chapter numbers in
Use
•
Repeat the above steps for more inputs.
•
Press
•
programmed playback.
3.2 CD/VCD/SVCD Programming
Enter the track numbers of your choice(two digits).
•
Refer to the previous section to program the tracks of your choice.
•
3.3 Clear the Programs
•
Highlight the current field on the screen and press CLEAR to delete
the program.
Note:Highlight "CLEAR" on the PROG screen and press OK to delete all
programs.
or
to highlight the title / chapter / track field and press the
or
to highlight the time.
.
(2 digit format, e.g. 01). Use the
/ /
and
to move to another entry.
or highlight PLAY on the screen and press OK to start the
GB - 16
or
to select "PROG".
or
.
Advertisement
Table of Contents
