Table of Contents
Advertisement
DVD discs allow up to 8 languages and 32 subtitles on a single disc. The language and subtitles can be changed,
and the whole disc or just part of it can be played and viewed from different angles (if the video is shot at different
camera angles).
Cleaning Discs
Picture freezing and sound skipping or repeating can occur if the disc inside the player is dirty.
When a disc becomes dirty, wipe it with a clean cloth. Wipe the disc
•
from the center out.
Do not wipe in a circular motion. Circular scratches can cause picture
•
distortion or render the disc unplayable.
Caution: Do not use solvents, commercially available cleaners, or antistatic spray to clean discs.
UNIT PREPARTION
Installation methods
Make sure you unplug the AC power cord before installing the unit. You can either mount your DVD player on its
stand or hang it on a wall.
Notes:
•
When attaching or removing the stand, place the unit on a cushion or soft cloth to avoid damage.
•
Only remove the specified screws otherwise a malfunction may occur. Be careful not to lose the removed
screws.
Mounting on the stand
With both hands, guide the main unit along the sides of the connecting
socket until it is firmly connected to the stand.
The design of the stand can help you fit the connection cables tightly.
1. To remove the stand cover, simply press the top of the clip, then
pull out towards you.
2.
Connect the main unit to the television. For more detailed
information, please refer to the next chapter—CONNECTIONS.
3. After placing the cables correctly, replace the stand cover on your
DVD stand.
GB - 4
Advertisement
Table of Contents
