Configuring Proxy Settings - Novell ZENWORKS PATCH MANAGEMENT 6.4 SP2 User Manual

Server Information and Status
The following table displays the Patch Management Server location and the communication
status.
Table 10-9: Server Information - Proxies Tab
Field
Patch Management
Server
Deployment Agent Status

Configuring Proxy Settings

Complete the following procedure to configure proxy settings.
1. Select Enable Proxy.
S R :
TEP ESULT
2. Type the server's URL address in the Server field.
3. Type the port in the Port field.
4. If you are using an Authenticated proxy, select Authenticated.
S R :
TEP ESULT
Figure 10-8: Proxy Tab
5. Type the username in the Username field.
The URL of the ZENworks Patch Management Server the
agent is registered against.
Indicates the current status (started, stopped, working,
waiting, or restarting) of the ZENworks Patch Management
service on the local device.
The Server and Port fields become active.
The Username and Password fields become active.
- 301 -
Description
U A
SING THE GENT