Using The Filter Functions To Select Vulnerabilities; Showing Only The Required Vulnerabilities - Novell ZENWORKS PATCH MANAGEMENT 6.4 SP2 User Manual

Using the Filter Functions to Select Vulnerabilities

When managing mandatory baselines, use filter functions to quickly find specific vulnerabilities.
1. From the Vulnerabilities or Selected Vulnerabilities tables, click Show Filters.
2. Type the filter criteria in the Name and/or the Information fields.
3. Click Apply Filters.
4. If desired, click Clear Filters to start another search.

Showing Only the Required Vulnerabilities

1. Click Filter.
S R :
TEP ESULT
2. Select the check boxes associated with vulnerabilities as needed.
: Only patch vulnerabilities that are both applicable and un-patched (based upon the
NOTE
current group membership) display in the Needed Detection Vulnerabilities window.
However, the Mandatory Baseline Management window displays all vulnerabilities that
do not require a manual installation, regardless of applicability or patch status.
3. Click OK.
S R :
TEP ESULT
The Needed Detection Vulnerabilities window opens.
The Needed Detection Vulnerabilities window closes and the patches
display in the Selected Vulnerabilities table.
- 173 -
U G
SING ROUPS