Custom Installation - Novell ZENWORKS ENDPOINT SECURITY MANAGEMENT 3.5 Installation Manual

Hide thumbs Also See for ZENWORKS ENDPOINT SECURITY MANAGEMENT 3.5:

Table of Contents

4 Specify the Policy Distribution Service domain name. This must be the fully qualified domain

name if the server resides outside the corporate firewall. Otherwise, only the NETBIOS name

for the server is required.

Enter Policy Distribution Service Domain Name

Figure 5-4

5 At the Copy Files screen, click Next to begin the installation.

6 An

ESM Setup Files

file and the

ESM-DS.cer

Management Service. Copy this file directly onto the machine designated as the host for the

Management Service, either via a netshare or by saving the file to a disk or thumb drive and

hand-loading it onto the server installation directory.

7 The Policy Distribution Service is now installed, click Finish to close the installation program

to launch the performance monitor.

5.1.2 Custom Installation

A custom installation displays the defaults used in the typical installation and permits the

administrator to specify, or browse to, a different directory to place the software files.

The administrator can select either to install a Novell self-signed SSL certificate or use one of their

own.

1 An SSL Certificate is required for secure communication between the Policy Distribution

Service and the Management Service, and between the DS and all Novell Security Clients. If

you already have a certificate authority, click Use the existing certificate IIS is configured for.

If you need a certificate, click Allow Novell to create, install, and use its own self-signed root

certificate. The installer creates the certificates and the signing authority. Regardless of the

certificate type, these certificates must be distributed to all users.

folder is generated in the installation directory. This contains a

file (Novell self-signing SSL certificate) required by the

Performing the Policy Distribution Service Installation

Setup

Table of Contents