Transferring Data By Using Direct Mode - Novell ZENWORKS 10 PERSONALITY MIGRATION - PERSONALITY MIGRATION REFERENCE 10.3 30-03-2010 Use And Installation Instructions

4.1.1 Transferring Data by Using Direct Mode

1 You must have performed Step 1 to Step 13 in
Settings and Data," on page
2 Be sure that ZENworks Personality Migration is enabled through the Windows Firewall. If it is
not enabled, see "Enabling ZENworks Personality Migration through the Windows Firewall"
on page 21.
3 Select Direct, then click Next. The source system waits for the destination system to connect.
4 On the destination system where ZENworks Personality Migration is installed, select the
source system whose settings and data you want to apply.
5 Click Next to apply the settings and data on the destination device.
Continue with Step 6
page 22.
Enabling ZENworks Personality Migration through the Windows Firewall
If you are migrating personalities across devices on a network by using the Direct mode, you must
enable the Windows Firewall to detect certain exceptions.
1 Click Start > Settings > Control Panel.
2 Double-click Windows Firewall to open the Windows Firewall dialog box.
3 Click the Exceptions tab.
4 In the Programs and Services list, check to see if ZENworks Personality Migration and
ZENworks Personality Core exceptions are available and selected. If they are, proceed to
Step 7.
5 If the exceptions are not available in the Programs and Services list, then click Add Program.
6 Browse to the Personality Migration installation folder and select the
PersonalityMigration.exe
7 Click OK.
17.
in Section 4.2, "Applying a User's Personality Settings and Data," on
and
PersonalityMigrationCore.exe
Section 4.1, "Storing a User's Personality
Manually Migrating Personality Settings
files.
21