Viewing License Features; Deleting A License Key - Novell SENTINEL LOG MANAGER 1.0.0.5 - ADMINISTRATION GUIDE 03-31-2010 Administration Manual

Adding a License Key Through Command Line When the License has Expired
You can add license through the command line by using the softwarekey.sh script. This is the only
method to add the license if the license has expired and either the system does not come up or it or
all attempts to log in fails.
1 Log in to the Novell Sentinel Log Manager server as
2 Change to the
Install_Directory/bin
3 Run the
softwarekey.sh
4 Specify the license key, then press
5 Restart the Novell Sentinel Log Manager server.

9.2.2 Viewing License Features

1 Log in to the Sentinel Log Manager as an administrator.
2 Click the About link in the upper left corner of the page.
3 Click the Licenses tab.
The Licenses section specifies the features, hostname, serial number, and expiry date of the
added licenses.
The Max EPS shows the maximum number of EPS value among the various licenses.
For example, if Sentinel Log Manager contains EPS licenses with values of 500, 1500,
2500, and 7500, the 7500 EPS value is displayed in the Max EPS field.
The Licensed Features section lists the features and expiry date of the license key.

9.2.3 Deleting a License Key

NOTE: You can only delete an expired license.
1 Log in to the Sentinel Log Manager as an administrator.
2 Click the About link in the upper left corner of the page.
3 Click the Licenses tab.
The expired date is displayed inside a red box with the Expired on <mm/dd/yy> text. The
delete license link is displayed next to the expiry date box. The delete license link is displayed
only when a license expires.
4 Click the delete license link. A confirmation message is displayed.
5 Click Delete.
directory.
script.
.
Enter
.
novell
Managing License Keys 139