Modifying The Ldap Authentication Configuration - Novell SENTINEL LOG MANAGER 1.0.0.5 - ADMINISTRATION GUIDE 03-31-2010 Administration Manual

Parameter
LDAP subtree to search for
users
Filename of the LDAP
server certificate
This parameter is displayed
only if you have specified 'y'
for Use SSL/TLS.
5 Enter one of the following:
to accept the values.
y
to enter new values.
n
to quit the configuration.
q
6 Enter to restart the Sentinel Log Manager server.
y
7 Log in to Sentinel Log Manager as
authentication type to authenticate with an existing user's LDAP credentials.
For more information about creating a user, see
You have successfully configured Sentinel Log Manager server for LDAP authentication, and users
can log in to Sentinel Log Manager by using an eDirectory username or Active Directory
sAMAccountName and password.

8.4.2 Modifying the LDAP Authentication Configuration

To modify an existing LDAP authentication configuration for a Sentinel Log Manager server:
1 Log in to a Sentinel Log Manager server as the
su - novell
2 Change to the
Install_Directory/config
cd Install_Directory/config
3 Modify the
LdapLogin
directory.
4 Modify the
.activemqkeystore.jks
5 Perform Step 1 through
LDAP Authentication," on page
Description
The subtree in the directory that has the user objects.
The following are examples for specifying subtree in eDirectory and
Active Directory:
eDirectory:
ou=users, o=novell
For eDirectory, if no subtree is specified, the search is run on the
entire directory.
Active Directory:
CN=users, DC=TEST AD, DC=provo, DC=novell,
DC=com
For Active Directory, the subtree cannot be blank.
The filename of the eDirectory/Active Directory CA certificate that you
have copied in Step 4.
. Create a Directory user and select the directory
admin
"Adding a User" on page
novell
directory:
entry in the
auth.login
file in the
Step 7 in Section 8.4, "Configuring Sentinel Log Manager Server for
132.
user:
file of the
Install_Directory/config
Install_Directory/config
129.
directory.
User Administration 135