Novell OPEN ENTERPRISE SERVER 2.0 SP2 - DOMAIN SERVICE FOR WINDOWS Manual page 102

eg:cn=SRV2.ou=india.o=novell
3 Create a user
following pre-requisites are met:
The container must be partitioned (before or after installing the server) by using the admin
for the tree.
A replica of the partition must exist on
The container admin does not have complete rights on the partition. If this replica exists
on other servers, the admin can add a replica, but cannot remove it from other servers.
4 Assign the following rights to the container admin:
Supervisor rights on this partition.
Supervisor rights (inherited) for the entry rights to the security container.
Read and Write permission for the DNS locator and DNS group object.
Read and Write permission for the DNS server object if the DNS server is located in other
domain.
Supervisor rights (inheritable) on the
Server object of the forest root domain, while installing an subsequent domain or an
subsequent domain controller as a container admin.
For example,
is the forest root domain.
The container admin needs supervisor rights on the configuration partition to create an
subsequent domain or an subsequent domain controller.
For more information on installing a secondary server into an existing tree as a non-
administrator user, refer to the
documentation/edir88/edirin88/index.html?page=/documentation/edir88/edirin88/data/
a7ivcnh.html).
5 Use the tree admin to extend the schema for DSfW:
5a On an existing OES 2 Linux server, run the Novell Schema tool found in YaST > Open
Enterprise Server > Novell Schema Tool and enter the IP address of the eDirectory 8.8
SP5 server with a writable replica of the root.
5b Specify the tree admin's password and click Next.
5c Select Novell Linux User Management (LUM), Novell DNS, Novell Domain Services for
Windows, Novell Directory Services and Novell NMAS.
It is not necessary to select any of the other items in the list. Wait for the schema changes
to be synchronized across the tree before proceeding with the installation of the first
DSfW server.
NOTE: You can use OES schema tool or iManager to extend the schema.
6 Configure Novell DSfW using YaST with the container admin credentials.
For information on installing and configuring Novell
DNS and DHCP
Linux.
102 OES 2 SP2: Domain Services for Windows Administration Guide
under the container
cn=localadmin
ou=OESSystemObjects,dc=parent,dc=com
eDirectory 8.8 Installation Guide (http://www.novell.com/
Services" in the OES 2 SP2: Novell DNS/DHCP Administration Guide for
eg:ou=india.o=novell,
cn=SRV2.ou=india.o=novell
ou=OESSystemObjects
where
®
DNS service, refer to
and ensure the
only.
container holding the NCP
dc=parent,dc=com
"Understanding