Deciding Between Name-Mapped Or Non-Name-Mapped Installation; Section 5.3, "Deciding Between Name-Mapped Or Non-Name-Mapped Installation - Novell OPEN ENTERPRISE SERVER 2.0 SP2 - DOMAIN SERVICE FOR WINDOWS Manual

Forest Component
Number of domain controller per domain
Number of simultaneous logins per domain
controller
Number of child domains at the same level (width)
Number of child domains(depth)
5.3 Deciding Between Name-Mapped or Non-
Name-Mapped Installation
Name-Mapped Installation: Installing DSfW in a name-mapped setup means you are installing
DSfW in an existing eDirectory tree inside a specific container.
Before you install DSfW in an existing container, the container must be partitioned.In
existing container Asia is mapped to create a DSfW forest. After the mapping, all of the containers
below the O= Asia container become part of the DSfW forest.
If you have mapped an existing container to a domain, you cannot map the sibling containers to
create a domain. Using the example in
container, you cannot partition the O=America or O=Europe containers.
However, it is possible to map the containers underneath O=Asia to a domain.
It is not possible to partition the root container and map it to create a DSfW forest.
30 OES 2 SP2: Domain Services for Windows Administration Guide
Scale upto
5
200
5
6
Figure 5-1, if you have already partitioned the O=Asia
Figure 5-1 the