Add Configuration Objects - Novell OPEN ENTERPRISE SERVER 2.0 SP2 - DOMAIN SERVICE FOR WINDOWS Manual

Error: 626 All Referrals Failed
Cause: The synchronization process between the replicas fails.
Solution: To resolve this issue, refer
documentation/nwec/?page=/documentation/nwec/nwec/data/al39nky.html)
Error: 625 Transport Failure/ Unknown Error
Cause: The DSfW server could not reach the master server. For example, installing a child server
requires the parent server to be reachable, or installing a DSfW server in the name-mapped forest
root domain scenario requires the server holding the tree replica to be reachable.
Solution 1: Ensure that the servers are reachable. Remove the bad address cache from the current
server by using the following command:.
set ndstrace=*UP
Try executing the task again.
Solution 2: Try executing the provisioning task manually. For details see,
Tasks Manually.
Error: 30 Retry Entries to Get the Replica Status in the Log File
Cause: A very slow network link can cause incomplete operations and multiple retries.
Solution: Check the speed of your network link. Try executing the task again.

Add Configuration Objects

All details related to task execution and state of the task are recorded in the
"Error: Insufficient Access" on page 121
"Entry already Exists" on page 121
"ldapmodify Failed" on page 122
All details related to task execution and state of the task are recorded in the
Error: Insufficient Access
Cause: The administrator being used to execute the
privileges to complete the operation.
Solution 1: In the
provisioning.log
administrator used to execute that command has adequate privileges to execute this command.
Solution 2: If the DNS Locator and Group objects are outside the domain partition, make sure the
administrator has privileges to access the objects.
Entry already Exists
Cause: You see this error when you retry executing a task and the task fails during execution.
Solution: For any task that has failed, delete the associated objects from the server and then retry
the task.
Novell Error Codes Reference Guide (http://www.novell.com/
ldapmodify
file, search for the
ldapmodify
Executing Provisioning
provisioning.log
provisioning.log
command does not have
command. Make sure the
Provisioning Domain Services for Windows 121
file
file