Advertisement
Quick Links
Thank you for purchasing our
Pacer Pro™ Fertilizer and
Salt Spreader | Assembly Instructions
We're delighted to have you as a customer
and are here to help! First off, let's get your
product assembled!
Table of Contents:
1: Spare Parts
2-4: Assembling Your Pacer Pro
5-6: How to Swap Over the Material Plates
7: How to Use the Pacer Pro
Broadcast Settings Guide
8: Warranty
Advertisement
Related Manuals for The Andersons Pacer Pro
Summary of Contents for The Andersons Pacer Pro
- Page 1 First off, let’s get your product assembled! Table of Contents: 1: Spare Parts 2-4: Assembling Your Pacer Pro 5-6: How to Swap Over the Material Plates 7: How to Use the Pacer Pro Broadcast Settings Guide 8: Warranty...
- Page 2 Spare Parts...
- Page 3 Assembling your Pacer Pro ™ Place the Hopper body (1) on the table so that the Take the back stand (5) and align it with the gearbox is pointing upwards. Take the bolts out of holes on the main frame (1). Place the four bolts the main frame (1) - you will use these to attach through the holes available.
- Page 4 Assembling your Pacer Pro ™ Take the small cotter pin (8) and place it through Once in position, use the same pliers to split the the hole on the outside of the other wheel. ends of the cotter pin (8) to hold the wheel in place.
- Page 5 Assembling your Pacer Pro ™ Take the other end of the control rod (3) and Make sure the slider at the bottom of the hopper align it with the hole on the on/off mechanism of is fully open. You should see the entirety of the the handle bar (4).
- Page 6 How to Swap Over the Material Plates Place the finished unit onto a table so that the Locate the R-pin that helps hold the material back of the spreader is easily accessible. plate in place on the underside of the material plate.
- Page 7 Pull the material plate out slightly to allow Push the bottom end of the pivot rod into the space to insert the pivot rod back into the pivot hole at the top of the material plate and secure bracket and material plate. with the R-pin.
- Page 8 How to use the Pacer Pro ™ Step 3: Walking Cross Sectional Fertilizer Spreading Patterns for the Use ½ the application rate suggested optimum application on the back of your fertilizer bag (For Fertilizer Only) Cover the area as shown. Repeating...
- Page 9 The Andersons. The Andersons at its discretion may require that the part(s) or product be returned along with the original purchase receipt for examination and compliance with the terms of this warranty.
Need help?
Do you have a question about the Pacer Pro and is the answer not in the manual?
Questions and answers