Certificate Password (Key Password); Subscriber Settings; Smtp Server; A.2 Subscriber Settings - Novell IDENTITY MANAGER 3.6.1 - MANUAL TASK SERVICE DRIVER Implementation Manual

A.1.10 Certificate Password (key password)
This parameter specifies the password for the certificate specified using the Name of certificate (key
alias) parameter.

A.2 Subscriber Settings

Section A.2.1, "SMTP Server," on page 34
Section A.2.2, "SMTP Account Name," on page 34
Section A.2.3, "Default "From" Address," on page 34
Section A.2.4, "Additional Handlers," on page 34

A.2.1 SMTP Server

This parameter specifies the name of the SMTP server that the Subscriber channel uses to send e-
mail messages. The parameter refers to the SMTP server name and not the hostname.
A.2.2 SMTP Account Name
If the SMTP server specified by using the SMTP server parameter requires authentication, this
parameter specifies the account name to use for authentication. The password used is the
Application password associated with the driver Authentication parameters.
A.2.3 Default "From" Address
If specified, this is an e-mail address used in the SMTP from field for e-mail messages sent by the
Subscriber channel. If this is not specified, then the <
contain a <
A < > element under <
from

A.2.4 Additional Handlers

If specified, this is a whitespace-separated list of Java class names. Each class name is a custom
class that implements the com.novell.nds.dirxml.driver.manualtask.CommandHandler interface and
handles a custom XDS element. The handler for <
Additional information about custom handlers is available in
Handlers for the Subscriber Channel," on page

A.3 Publisher Settings

This section describes settings for the Publisher channel.
Section A.3.1, "Additional Servlets," on page 35
34 Identity Manager 3.6 Manual Task Service Driver Implementation Guide
> element.
from
> elements sent to the Subscriber overrides this parameter.
mail
> elements sent to the Subscriber must
mail
> is a built-in handler.
mail
Appendix G, "Custom Element
69.