Starting The Driver; Creating The Driver In Imanager - Novell IDENTITY MANAGER 3.6.1 - MANUAL TASK SERVICE DRIVER Implementation Manual

Password: Specify the user's password.
4 Click OK.
5 Read the deployment summary, then click Deploy.
6 Read the message, then click OK.
7 Click Define Security Equivalence to assign rights to the driver.
The driver requires rights to objects within the Identity Vault and to the input and output
directories on the server. The Admin user object is most often used to supply these rights.
However, you might want to create a DriversUser (for example) and assign security
equivalence to that user. Whatever rights that the driver needs to have on the server, the
DriversUser object must have the same security rights.
7a Click Add, then browse to and select the object with the correct rights.
7b Click OK twice.
8 Click Exclude Administrative Roles to exclude users that should not be synchronized.
You should exclude any administrative User objects (for example, Admin and DriversUser)
from synchronization.
8a Click Add, then browse to and select the user object you want to exclude.
8b Click OK.
8c Repeat Step 8a
8d Click OK.
9 Click OK.

3.1.4 Starting the Driver

When a driver is created, it is stopped by default. To make the driver work, you must start the driver
and cause events to occur. Identity Manager is an event-driven system, so after the driver is started,
it won't do anything until an event occurs.
To start the driver:
1 In Designer, open your project.
2 In the Modeler, right-click the driver icon
For information about management tasks with the driver, see
page 29.

3.2 Creating the Driver in iManager

You create the Manual Task Service driver by importing the driver's basic configuration file and
then modifying the configuration to suit your environment. After you create and configure the
driver, you need to start it.
Section 3.2.1, "Importing the Driver Configuration File," on page 24
Section 3.2.2, "Configuring the Driver Settings," on page 26
Section 3.2.3, "Starting the Driver," on page 26
and Step 8b for each object you want to exclude.
or the driver line, then select Live > Start Driver.
Chapter 5, "Managing the Driver," on
Creating a New Driver 23