Importing The Driver Configuration File - Novell IDENTITY MANAGER 3.6.1 - MANUAL TASK SERVICE DRIVER Implementation Manual

3.2.1 Importing the Driver Configuration File

1 In iManager, click
2 In the Administration list, click Import Configuration to launch the Import Configuration
Wizard.
3 Follow the wizard prompts, filling in the requested information (described below) until you
reach the Summary page.
Prompt
Where do you want to place the
new driver?
Import a configuration into this
driver set
Driver name
Driver is Local/Remote
Remote Host Name and Port
Driver Password
Remote Password
24 Identity Manager 3.6 Manual Task Service Driver Implementation Guide
to display the Identity Manager Administration page.
Description
You can add the driver to an existing driver set, or you can
create a new driver set and add the driver to the new set. If you
choose to create a new driver set, you are prompted to specify
the name, context, and server for the driver set.
Use the default option, Import a configuration from the server
(.XML file).
In the Show field, select Identity Manager 3.6.1 configurations.
In the Configurations field, select the desired Manual Task
configuration file (MTDAccess, MTDCellphone,
MTDRoomNumber, or MTDWelcome).
The configuration files include the filters and policies needed to
implement each scenario. If you have a different scenario you
want to implement, you should select the basic configuration that
most closely resembles your desired scenario and modify it as
needed.
Type a name for the driver. The name must be unique within the
driver set.
Select Local if this driver will run on the Metadirectory server
without using the Remote Loader service. Select Remote if you
want the driver to use the Remote Loader service, either locally
on the Metadirectory server or remotely on another server.
This applies only if the driver is running remotely.
Specify the host name or IP address of the server where the
driver's Remote Loader service is running.
This applies only if the driver is running remotely.
Specify the driver object password that is defined in the Remote
Loader service. The Remote Loader requires this password to
authenticate to the Metadirectory server.
This applies only if the driver is running remotely.
Specify the Remote Loader's password (as defined on the
Remote Loader service). The Metadirectory engine (or Remote
Loader shim) requires this password to authenticate to the
Remote Loader