Novell IDENTITY MANAGER 3.6.1 - MANUAL TASK SERVICE DRIVER Implementation Manual page 25

Prompt
Define Security Equivalences
Exclude Administrative Roles
When you finish providing the information required by the wizard, a Summary page, similar to
the following is displayed.
At this point, the driver is created from the basic configuration file. To ensure that the driver
works the way you want it to for your environment, you must review and modify (if necessary)
the driver's default configuration settings.
4 To modify the default configuration settings, click the linked driver name, then continue with
the next section, Configuring the
or
To skip the configuration settings at this time, click Finish. When you are ready to configure
the settings, continue with the next section,
Description
The driver requires rights to objects within the Identity Vault. The
Admin user object is most often used to supply these rights.
However, you might want to create a DriversUser (for example)
and assign security equivalence to that user. Whatever rights
that the driver needs to have on the server, the DriversUser
object must have the same security rights.
You should exclude any administrative User objects (for
example, Admin and DriversUser) from synchronization.
Driver.
Configuring the Driver.
Creating a New Driver 25