Creating The Driver In Imanager; Starting The Driver; Importing The Driver Configuration File - Novell IDENTITY MANAGER 3.6.1 - NULL SERVICE AND LOOPBACK SERVICE DRIVERS Manual

8c Repeat
Step 8a
8d Click OK.
9 Click OK.

2.1.5 Starting the Driver

When a driver is created, it is stopped by default. To make the driver work, you must start the driver
and cause events to occur. Identity Manager is an event-driven system, so after the driver is started,
it won't do anything until an event occurs.
To start the driver:
1 In Designer, open your project.
2 In the Modeler, right-click the driver icon
For information about management tasks for the driver, see
page 25.

2.2 Creating the Driver in iManager

You create the Null Service driver by importing the driver's basic configuration file and then
modifying the configuration to suit your environment. After you've created and configured the
driver, you need to start it.
Section 2.2.1, "Importing the Driver Configuration File," on page 13
Section 2.2.2, "Configuring the Driver Settings," on page 15
Section 2.2.3, "Configuring the Driver Policies," on page 15
Section 2.2.4, "Starting the Driver," on page 15

2.2.1 Importing the Driver Configuration File

1 In iManager, click
2 In the Administration list, click Import Configuration to launch the Import Configuration
Wizard.
3 Follow the wizard prompts, filling in the requested information (described below) until you
reach the Summary page.
Prompt
Where do you want to place the
new driver?
Import a configuration into this
driver set
and Step 8b for each object you want to exclude.
to display the Identity Manager Administration page.
Description
You can add the driver to an existing driver set, or you can
create a new driver set and add the driver to the new driver set.
If you choose to create a new driver set, you are prompted to
specify the name, context, and server for the driver set.
Use the default option, Import a configuration from the server
(.XML file).
In the Show field, select Identity Manager 3.6 configurations.
In the Configurations field, select the GenericNull file.
or the driver line, then select Live > Start Driver.
Chapter 5, "Managing the Driver," on
Creating a New Null Service Driver 13