Novell GROUPWISE 8 - DATABASES Manual page 56

For the Repair Mailbox item to display on the GroupWise Windows client Tools menu, the following
files must be installed in the GroupWise software directory; by default, this is
Files\Novell\GroupWise
gwcheck.exe
gwchkxx.dll
gwchkxx.chm
The GroupWise administrator can install these files by using SetupIP to install the GroupWise
Windows client, and selecting to install and enable GWCheck. The default for SetupIP is to install
GWCheck, but not enable GWCheck. The files are then copied to the
\novell\groupwise\gwcheck
GWCheck, see
If the client was installed using the GroupWise Windows client Setup program or the defaults are
chosen for SetupIP, the client user needs to copy the files from the GWCheck directory
(
\novell\groupwise\gwcheck
To run GWCheck:
1 From the Start menu, click Run, then browse to and double-click
2 To view online help in GWCheck, click Help.
3 Continue with
on page
34.1.3 Using GWCheck on Linux
Two versions of GWCheck are available on Linux, one for a graphical user interface (GUI)
environment and one for a text-only environment.
"Using GUI GWCheck (gwcheck)" on page 443
"Using Text-Based GWCheck (gwcheckt)" on page 443
442 GroupWise 8 Administration Guide
.
(Replace xx with your language code)
(Replace xx with your language code)
directory. For additional information about SetupIP and
"[GWCheck]" on page
) to the main GroupWise directory (
Section 34.1.5, "Performing Mailbox/Library Maintenance Using GWCheck,"
445.
1131.
c:\Program
).
\novell\groupwise
.
gwcheck.exe