Installing Through Zenworks Linux Management On Oes Linux Sp3 - Novell EDIRECTORY 8.8 SP3 Installation Manual

Hide thumbs Also See for EDIRECTORY 8.8 SP3:
Table of Contents

Advertisement

export MANPATH=/opt/novell/man:/opt/novell/eDirectory/man:$MANPATH
export TEXTDOMAINDIR=/opt/novell/eDirectory/share/locale:$TEXTDOMAINDIR
Use the ndspath script to export the environment variables
If you do not want to export the paths manually, you can use the /opt/novell/
eDirectory/bin/ndspath script as follows:
Prefix the ndspath script to the utility and run the utility you want as follows:
/opt/novell/eDirectory/bin/ndspath utility_name_with_parameters
Export the paths in the current shell as follows:
. /opt/novell/eDirectory/bin/ndspath
After entering the above command, run the utilities as you would normally do.
The path exporting instructions should be placed at the end of /etc/profile or
~/bashrc or similar scripts. Therefore, whenever you log in or open a new shell,
you can start using the utilities directly.
You can use the ndsconfig utility to configure eDirectory Server after installation.
Novell Modular Authentication Service (NMAS
default, ndsconfig configures NMAS. You can also use the nmasinst utility to configure NMAS
server after installation. This must be done after configuring eDirectory with ndsconfig.
For more information on the ndsconfig utility, see
For more information on the nmasinst utility, see
on page
80.
3.6.4 Installing Through ZENworks Linux Management on OES
Linux SP3
eDirectory 8.8 on OES Linux SP3 leverages ZENworks
distribution and deployment using the oes-edir88 channel.
For more information on ZENworks Linux Management, refer to
(http://www.novell.com/products/zenworks/linuxmanagement/index.html).
For more information on registering and updating Novell Linux products, refer to
Registration and Updates
You can install to eDirectory 8.8 on OES Linux SP3 using either of the following methods:
Through the Command Line Interface
Through the GUI
) is installed as part of the server component. By
TM
"The ndsconfig Utility" on page
"Using the nmasinst Utility to Configure NMAS"
(http://support.novell.com/linux/registration/).
®
Linux Management to provide easy install
ZENworks Linux Management
Installing or Upgrading Novell eDirectory on Linux
123.
Linux
63

Advertisement

Table of Contents
loading

Table of Contents