Using Zenworks Desktop Management To Distribute The Groupwise Windows Client; Using Zenworks Linux Management To Distribute The Groupwise Linux Client; Error Log File - Novell GROUPWISE 8 - CLIENT Manual

4 If the client software is being installed from a mapped drive, select Update by Copying From,
then select Software Distribution Directory or browse to and select another location.
5 Select Force Auto-Update Check by GroupWise Components, then click OK.
The next time each client user starts the Windows client, the client detects that the software version
in the software distribution directory has been updated. It launches the client Setup program, which
runs according to the setting you have provided in the
If a mapped drive to the software distribution directory is found, the client software is installed from
the mapped drive. If a mapped drive to the software distribution directory is not found, the Setup
program looks at the IP locations you specified in
using by SetupIP.
If no connection to a software distribution directory can be made, the
on the user's workstation. This file explains why none of the connections could be
c:\windows
made.

70.1.8 Error Log File

If an error occurs during the software update and
message is logged in the
ASCII text file.
If you add
ErrorMessage=error_text
the file, the specified error text is displayed. Otherwise, a generic error message is
setup.cfg
displayed, notifying the user to contact the system administrator.
70.1.9 Disabling Your AutoUpdate Customizations
To stop the client Setup program (
delete from the
setup.cfg
file, the Setup program offers the user all client installation options to choose from.
70.2 Using ZENworks Desktop Management to
Distribute the GroupWise Windows Client
You can use the Application Management functionality in Novell
Management to distribute the GroupWise Windows client to workstations. For instructions, see
"Novell ZENworks" in the
70.3 Using ZENworks Linux Management to
Distribute the GroupWise Linux Client
You can use ZENworks Linux Management to install the GroupWise Linux/Mac client and the
Linux agents. For instructions, see
ShowDialogs=No
file in the user's
gwsetup.err
as the last entry under the
) from using the setup configuration file (
setup.exe
subdirectory where
win32
GroupWise 8 Interoperability
"Novell ZENworks" in the
file.
setup.cfg
and installs the client software
writeip.ini
setupip.err
in the
setup.cfg
directory. The log file is an
c:\windows
[GroupWiseSetup]
resides. Without a
setup.exe
®
ZENworks Desktop
Guide.
GroupWise 8 Interoperability
Distributing the GroupWise Client 1139
file is created in
file, the error
section in
),
setup.cfg
setup.cfg
Guide.