Novell BUSINESS CONTINUITY CLUSTERING 1.0 - ADMINISTRATION Manual page 38

To add resource script search and replace values specific to this resource:
1 In the Resource Script Replacements section of the page, click New.
2 Add the desired search and replace values, then click OK.
3 If this is an existing cluster resource, continue with
IMPORTANT: If you change the resource-specific search and replace data after intitially adding it,
you must update the resource load script in one of the other clusters by editing it and adding a space
or a comment to it. This will cause the script to be updated with the new search and replace data.
Selecting Peer Clusters for the Resource
Peer clusters are the other clusters that this cluster resource can be migrated to. The cluster or
clusters that you select determine where the resource can be manually migrated. If you decide to
migrate this resource to another cluster, you must migrate it to one of the clusters that have been
selected.
1 Select the other clusters that this resource can be migrated to.
2 Do one of the following:
Adding Disk Array Mapping Information
You can add commands specific to your SAN hardware that might be needed during a migration to
promote mirrored LUNs to primary on the cluster where the pool resource is being migrated.
Consult your SAN hardware documentation for information and commands necessary to promote
LUNs on one side of a mirrored group to primary.
If necessary, add disk array mapping information for this pool resource. The maximum size of the
data that can be included here is 64 KB. Click Apply after adding the necessary data. You can add a
Perl script or any commands that can be run on the NetWare server console. You can also add
commands to call other scripts. Any data or information added here is stored in eDirectory. If you
add commands to call outside scripts, those scripts must exist on every server in the cluster.
38 Novell Business Continuity Cluster Services 1.0 Administration Guide
If a resource has already been configured for business continuity, you can click Edit to change
existing search and replace values or click Delete to delete them.
The search and replace values you specify here apply to only to the resource you are enabling
for business continuity. If you want the search and replace values to apply to any or all cluster
resources, add them to the entire cluster instead of just to a specific resource.
See "Adding Resource Script Search and Replace Values" on page 36
resource script search and replace values and adding those values to the entire cluster.
Resource section below. If you are creating a new cluster resource, click Next, then continue
with Step 1 in the Selecting Peer Clusters for the Resource
If you are creating a new nonpool resource, click Finish.
If this is an existing cluster resource, click Apply.
If you are creating a new cluster pool resource, click Next and continue with the
Disk Array Mapping Information
If this is an existing cluster pool resource, continue with the
Information section below.
Step 1 in the
section below.
section below.
for more information on
Selecting Peer Clusters for the
Adding
Adding Disk Array Mapping