Novell BUSINESS CONTINUITY CLUSTERING 1.0 - ADMINISTRATION Manual page 30

The eDirectory replica must have at least read/write access to the following containers
If the eDirectory replica does not have read/write access to the containers listed above,
synchronization will not work properly.
NOTE: Filtered eDirectory replicas are not supported with this version of Business Continuity
Cluster software. Full replicas are required.
To configure the DirXML drivers/templates:
1 Start Internet Explorer 5 or later and enter the URL for iManager.
2 Enter your username and password.
3 In the left column, click DirXML Management (or DirXML Utilities if the iManager plug-in
4 Choose to place the new driver in a new driver set.
5 Specify the driver set name, context, and the server that the driver set will be associated with.
6 Choose to create a new partition for the driver set, then click Next.
7 Choose to import a preconfigured driver from the server, then select the DirXML
8 Fill in the values on the wizard page as prompted, then click Next.
30 Novell Business Continuity Cluster Services 1.0 Administration Guide
The container where the DirXML or Identity Manager drivers are located.
The container where the cluster object resides.
The parent container of the container where the server objects reside.
The container where the cluster pool and volume objects will be placed when they are
synchronized to this cluster.
The URL is http://server_ip_address/nps/imanager.html. Replace server_ip_address with the
IP address or DNS name of the NetWare 6.5 server that has iManager and the DirXML
preconfigured templates for iManager installed.
has been updated), then click the Create Driver link.
Both the User object synchronization driver and the cluster resource synchronization driver can
be added to the same driver set.
The server is the same server where you installed the DirXML engine and eDirectory driver.
Choosing to create a new partition helps keep the driver set separate from other partition
operations.
preconfigured template for cluster resource synchronization.
The template name is BCCClusterResourceSynchronization.XML.
Each field contains an example of the type of information that should go into the field.
Descriptions of the information required are also included with each field.
Additional information for the wizard page fields includes:
Driver name: Enter a unique name for this driver that will identify its function. For
example, Cluster1SyncCluster2. If you use both preconfigured templates, you must
specify different driver names for each driver template.
Name of SSL Certificate: If you do not have an SSL certificate, leave this value set to
the default. The certificate will be created later in the configuration process. See
page 32 for instructions on creating SSL certificates.
Step 1 on