Installing The Dirxml 1.1A Management Utilities; Installing The Dirxml Management Utilities On A Netware Server - Novell BUSINESS CONTINUITY CLUSTERING 1.0 - ADMINISTRATION Manual

2 At the GUI server console, click Novell > Install and then click Add.
If the GUI server console isn't running, launch it by entering STARTX at the console.
3 In the Path to Install From field, browse to and select nw\product.ni on the DirXML CD and
then click OK twice.
4 On the DirXML Product Installation page, click Next.
5 Read the license agreement; if you agree to the terms, click I Accept.
6 On the Components page, mark DirXML Engine and Drivers, then click Next.
7 On the Schema Extension page, enter the following information and then click Next:
User Name: Specify the context of a user who has rights to extend the schema, for
example, CN=admin.O=hq.
User Password: Specify the password for the admin or equivalent user you specified.
8 Select the DirXML Driver for eDirectory, even if you only have one eDirectory tree (your
clusters are in the same eDirectory tree). Click Next.
NOTE: This screen lists all DirXML drivers. Those that cannot be installed on NetWare are
disabled. Drivers that aren't licensed in this bundle, but that can run on NetWare, are labeled
Evaluation. Evaluation drivers require a separate purchase and activation within 90 days of
their installation.
NOTE: The DirXML 1.1a driver for eDirectory must be installed on one node in each cluster.
Business Continuity Cluster software will not function correctly if the driver is installed on a
NetWare server that is not a cluster node.
9 Read the Summary page, then click Finish.
The file copy might take a few minutes.
10 After the Installation Complete dialog box is displayed, click Close.
2.3 Installing the DirXML 1.1a Management
Utilities
The DirXML management utilities add the necessary roles and iManager functionality for the
Business Continuity Cluster software. The management utilities can be installed on either a NetWare
6.5 server or a Windows server. Where you install the management utilities depends on where you
access and run iManager. If you choose to install the management utilities on a NetWare server, you
might want to consider a server that is not part of a cluster, but is in the same eDirectory tree as the
cluster. This is because DirXML cannot be failed over from one cluster server to another.
IMPORTANT: Do not install DirXML 2.x management utilities with the DirXML 1.1a engine. If
you do, the DirXML Driver for eDirectory will be converted to version 2.x, and the DirXML 1.1a
engine will no longer be able to get the driver information.
2.3.1 Installing the DirXML Management Utilities on a NetWare
Server
1 At the NetWare 6.5 server where iManager is installed, insert the DirXML CD into the CD
drive.
Installation and Setup 19