Related Manuals for Sunny Health & Fitness SF-E323054
Summary of Contents for Sunny Health & Fitness SF-E323054
- Page 1 SMART PORTABLE SIT AND STAND MAGNETIC ELLIPTICAL WITH RESISTANCE BANDS SF-E323054 USER MANUAL IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE...
- Page 2 IMPORTANT SAFETY INFORMATION We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained, and used properly.
- Page 3 PRE-ASSEMBLY CHECK LIST Description Spec. Qty. Main Frame Resistance Band Battery Thank You Card User Manual Ordering Replacement Parts (U.S. and Canadian Customers only) Please provide the following information in order for us to accurately identify the part(s) needed: The model number (found on cover of manual) ...
- Page 4 ASSEMBLY INSTRUCTIONS We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, STEP 1: Turn the Connecting Hook (No. 58) in the Resistance Band (No. 57) clockwise so that the Connecting Hook (No. 58) can pass through the D-shape Webbing Buckle (No.
- Page 5 BATTERY REPLACEMENT BATTERIES BATTERIES BATTERY INSTALLATION: 1. Take out 2 AAA batteries from the manual bag. 2. Remove the Meter (No. 9) from Main Frame (No. 1). 3. Install 2 AAA batteries into the battery case on the back of the Meter (No .9). Pay attention to the battery + and –...
- Page 6 EXERCISE METER FUNCTION KEYS: MODE: 1. Press the MODE key repeatedly to select the desired value (TIME/SPEED/CAL/DIST/PULSE/SCAN). 2. Hold the MODE key for 2 seconds to reset all values when the Bluetooth is not connected. 3. Press and hold the MODE key for 6 seconds to disconnect from both the SunnyFit APP and the heart rate monitor;...
- Page 7 WIRELESS HEART RATE 1. The wireless heart rate icon will flash when the meter is on. If the heart rate monitor is not connected within 1 minute, the wireless heart rate icon will turn off. 2. After exercise resumes, the wireless heart rate icon will flash. If the heart rate monitor is not connected within 1 minute, the wireless heart rate icon will turn off.
- Page 8 ADJUSTMENTS GUIDE ADJUSTING THE TENSION Adjust the tension by rotating the Tension Control Knob (No. 8) clockwise to increase the level of resistance. Rotate the Tension Control Knob (No. 8) counter- clockwise to decrease the level of resistance. Tension levels are set at Level 1 being the lowest and Level 16 being the highest.
- Page 9 PARTS LIST Description Spec. Description Spec. Main Frame Belt J300 Left Pedal Support Closing Ring Tube Right Pedal Support Bearing 6003 Tube Crank Screw M5*15 Magnetic Board Flat Washer Φ8.2*Φ16*1.5 Idler Wheel Shaft Sleeve Left Pedal Bearing 6000 Right Pedal Washer Φ10.2*Φ20*1.5 Screw...
- Page 10 EXPLODED DIAGRAM 23 40 Version 1.0...
Need help?
Do you have a question about the SF-E323054 and is the answer not in the manual?
Questions and answers