Related Manuals for OLIGHT Odin GL
Summary of Contents for OLIGHT Odin GL
- Page 1 USER MANUAL Thank you for purchasing this Olight product. Please read this manual carefully before use and keep it for future reference!
- Page 2 IN THE BOX Odin GL (with battery) USB Magnetic Pic Rail Magnetic Remote H2.5/H1.5 Mount Charging Cable Switch Wrench M3x4 NYLOK Screws Cable Zip Ties Oval Point Set Socket Screws Screw HIGH: 11,556cd HIGH: 215 IPX4 LOW: 2,255cd LOW: 95...
- Page 3 * The GL beam level is Class 3R/Class IIIa, obeying the standard IEC60825-1 requirement and complying with 21 CFR 1040.10 AND 1040.11. * All above specifications are test results based on ANSI/NEMA FL1 Standard. The tests are performed when the included battery is fully charged. USB MAGNETIC CHARGING CABLE -- MCC3 Parameter Speci cation...
- Page 4 Remove the insulating film Unscrew Remove the lens protective film AVAILABLE BATTERIES • 1 x customized 5000mAh 21700 rechargeable lithium battery CHARGING VIBRATING POWER INDICATOR It helps to alert if the battery is low (power<20% vibrate once every 5 minutes; power<10% vibrate once per minute; power< 5% vibrate once every 10 seconds).
- Page 5 PRODUCT INSTALLATION a. Loosen the screws and install the rail mount in its desired position, then tighten the screws. Unscrew Screw b. Slide the product into the rail mount until you hear a click, then turn the button 90 degrees clockwise as the mark shows to fix the product.
- Page 6 REMOTE SWITCH INSTALLATION a. Attach the magnetic remote switch to the tail of the product (make sure the detent ring of the remote switch is unlocked). b. Push the ring forward to fix the remote switch. Detent ring MAGNETIC REMOTE SWITCH LO Button ( Low ) HI Button...
- Page 7 DANGER • DO NOT shine the light or GL beam directly into human eyes. This may cause temporary blindness, or permanent damage to the eyes. • DO NOT cover the flashlight's head or place the head on the ground when the flashlight is on. The radiation energy may cause damage to the flashlight itself, or even result in the burning of flammable objects nearby.
- Page 8 • The Odin GL can only be mounted on Picatinny rails with the included Picatinny mount. Please don't mount it on any M-LOK rails, otherwise the GL beam cannot be zeroed properly. • Please use the mount slot with tightening screws to install the flashlight for a secure fit.
- Page 9 ( EN ) English HOW TO OPERATE THREE LIGHT SETTINGS AVAILABLE: By rotating the ring at the head of the flashlight to select white LED only, white LED/GL beam combined, GL beam only accordingly. TAIL SWITCH: Press the tail switch lightly to produce a low light output or press the tail switch hard to produce a high light output.
- Page 10 ( SK ) Slovenskýjazyk AKO POUŽÍVAŤ TRI DOSTUPNÉ NASTAVENIA SVETLA: Otočením krúžku v čele baterky vyberiete iba bielu LED, kombinácia biela LED a zelená, zelené svetlo iba zodpovedajúcim spôsobom. CHVOSTOVÝ VYPÍNAČ: Ľahko stlačte spínač koncovky, aby ste dosiahli slabý svetelný výkon, alebo stlačte silnejšie koncový...
- Page 11 WARRANTY Within 30 days of purchase: Contact the original seller for repair or replacement. Within 5 years of purchase: Contact Olight for repair or replacement. Battery warranty: Olight offers a one year warranty for all rechargeable batteries. USB magnetic charging cable: One year.
Need help?
Do you have a question about the Odin GL and is the answer not in the manual?
Questions and answers