Related Manuals for OLIGHT Warrior 3S
Summary of Contents for OLIGHT Warrior 3S
- Page 1 USER MANUAL Thank you for purchasing this Olight Product. Please read this manual carefully before use and keep it for future reference!
- Page 2 IN THE BOX Holster USB Magnetic Warrior 3S Charging Cable (with Battery) SPECIFICATIONS TURBO 2.5min 2300lumens 100% 160min 39min HIGH 166min 800lumens 100% 39min 200lumens 100% 130h 15lumens 100% MOON 55days 1lumen 100% TURBO HIGH MOON 300m 180m 23,000cd 1.5m IPX8 176g / 6.21oz...
- Page 3 BATTERY INSTALLATION Before first use, please unscrew the tailcap and remove the insulating film. If the battery needs to be replaced, make sure that the positive end of the new battery faces the flashlight head when you put it in. Insulating Film Remove the insulating film AVAILABLE BATTERIES...
- Page 4 USB MAGNETIC CHARGING CABLE -- MCC3 Parameter Speci cation USB type A - magnetic charging Charging cable connector, length: 0.5m USB A - Type DC 5V 2A Input CC&CV Charging pattern Maximum charging current Voltage of fully 4.2V±0.05V charged battery 5.5 hours (For reference only.
- Page 5 PROXIMITY PROTECTION FUNCTION When the light is on and set at level 3 or higher brightness, if the front lens proximity sensor detects an obstruction nearby, the brightness will automatically reduce. The brightness will restore when the obstruction is gone. The light will turn off directly if the blockage continues for more than 1 minute.
- Page 6 DANGER •DO NOT shine the light directly into human eyes. This may cause temporary blindness, or permanent damage to the eyes. •DO NOT cover the flashlight's head or place the head on the ground when the flashlight is on. The radiation energy may cause damage to the flashlight itself, or even result in the burning of flammable objects nearby.
- Page 7 （EN）English HOW TO OPERATE SIDE SWITCH ON/OFF: Single click the side switch to turn the light ON/OFF. When the light is turned on again, it will return to the previously memorized mode. CHANGE BRIGHTNESS LEVEL: When the flashlight is on, press and hold the side switch and it will, starting from the present brightness level, automatically cycle through Low, Medium, and High mode.
- Page 8 for Strobe, release switch to turn the flashlight off. SWITCH BETWEEN DIFFERENT PROGRAM CONFIGURATIONS Switch between configuration 1 and configuration 2 by pressing hard then holding tail switch and single press on side switch at the same time; when you release tail switch, the Configuration will be selected.
- Page 9 EU-Declaration of Conformity can be found here: https://olightworld.com/ec-declaration EXCLUSION CLAUSE Olight is not liable for damages or injuries sustained resulting from the usage of the product inconsistent with the warnings in the manual, including but not limited to using the product inconsistent with the...
- Page 10 Global Customer Support Customer-service@olightworld.com Visit www.olightworld.com to see our complete product line of portable illumination tools. Dongguan Olight E-Commerce Technology Co., Ltd 4th Floor, Building 4, Kegu Industrial Park, No 6 Zhongnan Road, Changan Town, Dongguan City, Guangdong, China. Made in China 3.4000.0417...
Need help?
Do you have a question about the Warrior 3S and is the answer not in the manual?
Questions and answers