Advertisement
1.4 MPa Demo Kit (P/N 3934702) contents:
DESCRIPTION
Demo Kit Transit Case
PPC4 Transit Case
SPLT, self purging liquid trap, for PPC
200 psi digital pressure gauge
5 psi analog pressure gauge
Cable assembly, DB9 M x F
36 in. test hose assembly, 2500 psi
72 in. supply hose assembly, 2500 psi
Swivel adaptor, 1/4 in. x 1/8 in.
NPT female
Reducer,1/4 in. to 1/8 in. NPT
Adaptor,1/4 in. NPT male x 1/4 in. tube
Elbow, 1/4 in. tube
1/4 in. NPT male hex nipple
Fluke. Keeping your world up and running.®
Fluke Calibration
PO Box 9090
Everett, WA 98206 U.S.A.
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
QTY
PART NO.
1
3984452
1
3338097
1
3069823
1
3984172
1
3984220
1
2758335
1
3984857
1
3984869
1
3984825
1
1811842
1
3863458
1
3867817
1
3132779
Figure 2: 1.4 MPa PPC4E Demo Kit Assembly
For more information call:
In the U.S.A. (800) 443-5853 or
Fax (425) 446-5116
In Europe/M-East/Africa +31 (0) 40 2675 200 or
Fax +31 (0) 40 2675 222
In Canada (800)-36-FLUKE or
Fax (905) 890-6866
The 1.4 MPa PPC4E demo kit includes UUT (unit
under test) pressure gauges with ranges selected for
use with PPC4EX 1.4M pressure controller/calibrator.
The demo kit connections and gauges should be
installed with the controller/calibrator and pressure
supply as illustrated below.
Pneumatic connections that will be frequently
disconnected are o-ring type quick connectors which
can be connected without thread tape, sealant or
tools. The traditional pipe thread and tube fittings in
the kit can remain connected during transport, so that
all of the connections required for a demonstration
can be quickly connected by hand. Separate adaptors
may be needed to connect to local pressure supply.
Warning
Flexible pressure hoses in this kit have
maximum operating pressure of 17 MPa
(2500 psi).
From other countries: +1 (425) 446-5500 or
Fax +1 (425) 446-5116
Web access:
http://www.fluke.com
©2011 Fluke Corporation.
Specifications subject to change without notice.
Printed in U.S.A. 3/2011 3986408A D-EN-N
Modification of this document is not permitted
without written permission from Fluke Corporation.
Advertisement
