Table of Contents
Advertisement
CAUTION!
1.
FSB1066-CPU is supported only when you install AGP VGA card into AGP
slot. Besides, if you use a FSB1066-CPU on this motherboard, please
adopt a DDR400 CL2.5 memory module.
2.
About the setting of "Hyper Threading Technology", please check page 25.
3.
This motherboard supports Untied Overclocking Technology. Please read "Un-
tied Overclocking Technology" on page 21 for details.
4.
This motherboard supports Dual Channel Memory Technology. Before you
implement Dual Channel Memory Technology, make sure to read the
installation guide of memory modules on page 15 for proper installation.
5.
Please check the table below for the memory support frequency and its
corresponding CPU FSB frequency.
CPU FSB Frequency
800
533
*
When you use an FSB800-CPU on this motherboard, it will run at
DDR320 if you adopt a DDR333 memory module.
6.
Although this motherboard offers stepless control, it is not recommended
to perform over-clocking. Frequencies other than the recommended CPU
bus frequencies may cause the instability of the system or damage the
CPU.
7.
While CPU overheat is detected, the system will automatically shutdown.
Before you resume the system, please check if the CPU fan on the
motherboard functions properly and unplug the power cord, then plug it
back again. To improve heat dissipation, remember to spray thermal
grease between the CPU and the heatsink when you install the PC system.
8.
Do NOT use a 3.3V AGP card on the AGP slot of this motherboard!
It may cause permanent damage!
9.
Power Management for USB 2.0 works fine under Microsoft
SP1 or SP2 / 2000 SP4. It may not work properly under Microsoft
®
dows
98/ ME.
8 8 8 8 8
Memory Support Frequency
*
DDR266, DDR320
, DDR400
DDR266, DDR333
®
®
Windows
XP
®
Win-
Advertisement
Table of Contents
