Hide thumbs Also See for 775I915P-SATA2:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Quick Links

Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
No part of this installation guide may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this guide may or may not be registered
trademarks or copyrights of their respective companies, and are used only for
identification or explanation and to the owners' benefit, without intent to infringe.
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Specifications and information contained in this guide are furnished for informational
use only and subject to change without notice, and should not be constructed as a
commitment by ASRock. ASRock assumes no responsibility for any errors or
omissions that may appear in this guide.
With respect to the contents of this guide, ASRock does not provide warranty of any
kind, either expressed or implied, including but not limited to the implied warranties or
conditions of merchantability or fitness for a particular purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the guide or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
ASRock Website: http://www.asrock.com
Copyright©2005 ASRock INC. All rights reserved.
ASRock 775i915P-SATA2 Motherboard
Published August 2005
1 1 1 1 1

Advertisement

Table of Contents
loading

Summary of Contents for ASROCK 775I915P-SATA2

  • Page 1 Disclaimer: Specifications and information contained in this guide are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this guide.
  • Page 2 North Bridge Controller USB 2.0 Header (USB67, Blue) CPU Fan Connector (CPU_FAN1) SATA2_EN5 2 x 240-pin DDRII DIMM Slots USB 2.0 Header (USB45, Blue) (Dual Channel A: DDRII_1, DDRII_3; Yellow) Clear CMOS Jumper (CLRCMOS1) 2 x 240-pin DDRII DIMM Slots Infrared Module Connector (IR1) (Dual Channel B: DDRII_2, DDRII_4;...
  • Page 3 PS/2 Mouse Port (Green) Front Speaker (Lime) If you use 2-channel speaker, please connect the speaker’s plug into “Front Speaker Jack”. See the table below for connection details in accordance with the type of speaker you use. TABLE for Audio Output Connection...
  • Page 4: Package Contents

    This Quick Installation Guide contains introduction of the motherboard and step-by- step installation guide. More detailed information of the motherboard can be found in the user manual presented in the Support CD. Because the motherboard specifications and the BIOS software might be updated, the content of this manual will be subject to change without notice.
  • Page 5: Specifications

    - Boot Failure Guard (B.F.G.) Expansion Slot - 3 x PCI slots - 1 x AGI Express slot for PCI Express x 16 graphics card (see CAUTION 5) - 1 x PCI Express x 16 slot - 1 x PCI Express x 1 slot Audio - Realtek ALC850 7.1 channel AC’97 audio codec...
  • Page 6 - 1 x Serial ATAII 3.0Gb/s connector by JMicron JMB360 (PCIE x 1 interface) (Supports “Hot Plug” function) - 1 x ATA100 IDE connector (supports 2 x IDE devices) - 1 x Floppy connector - CPU/Chassis FAN connector - 20 pin ATX power connector...
  • Page 7 CPU and the heatsink when you install the PC system. If you install PCI Express VGA card to AGI Express slot, PCIE2 slot (PCIE x 1) and SATAII functions will be disabled. For the information of the compatible PCI Express VGA cards, please refer to the “Supported PCI...
  • Page 8: Supported Pci Express Vga Card List For Agi Express Slot

    RADEON X600PRO MSI X800XT Radeon X800 XT For the latest updates of the supported PCI Express VGA card list for AGI Express slot, please visit our website for details. ASRock website: http://www.asrock.com/support/index.htm Note. Turbo cache PCI Express x 16 VGA cards are not recommanded to use.
  • Page 9: Pre-Installation Precautions

    Before you insert the 775-LAND CPU into the socket, please check if the CPU surface is unclean or if there is any bent pin on the socket. Do not force to insert the CPU into the socket if above situation is found.
  • Page 10 775-LAND CPU For proper inserting, please ensure to match the two orientation key notches of the CPU with the two alignment keys of the socket. Step 2-3. Carefully place the CPU into the socket by using a purely vertical motion.
  • Page 11: Installation Of Cpu Fan And Heatsink

    1. It is recommended to use the cap tab to handle and avoid kicking off the PnP cap. 2. This cap must be placed if returning the motherboard for after service. Step 4. Close the socket: Step 4-1. Rotate the load plate onto the IHS.
  • Page 12: Installation Of Memory Modules (Dimm)

    (the same brand, speed, size and chip-type) DDR/DDRII DIMM pair in the slots of the same color. In other words, you have to install identical DDRII DIMM pair in Dual Channel A (DDRII_1 and DDRII_3;...
  • Page 13: Installing A Dimm

    Unlock a DIMM slot by pressing the retaining clips outward. Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot. The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.
  • Page 14: Expansion Slots

    Slots) Slots) Slots) There are 3 PCI slots, 2 PCI Express slots, and 1 AGI Express slot on this motherboard. PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI interface. PCIE Slots: PCIE1 (PCIE x 16 slot) is used for PCI Express cards with x16 lane width graphics cards.
  • Page 15: Dual Graphics Feature

    Express x 1), and SATA II. You can also adjust the jumpers to disable PCIE2 slot (PCIE x 1) and SATA II. Then only AGI Express slot (PCI Express x 4) will be enabled. In other words, you are able to adjust the jumpers to enjoy the benefit of Dual Graphics feature.
  • Page 16: Pcie Vga Card Driver Installation Guide For Windows 98 Se / Me

    Windows 98 SE / ME Windows 98 SE / ME If your system is Windows 98 / ME and want to install PCIE VGA card driver. Please follow the below steps for proper driver installation. 1. Click “My Computer” on your desktop, and right-click “Properties”.
  • Page 17: Jumpers Setup

    Note: To select +5VSB, it requires 2 Amp and higher standby current provided by power supply. JR1 JL1 (see p.2 No. 29) Note: If the jumpers JL1 and JR1 are short, both the front panel and the rear panel audio connectors can work. Clear CMOS (CLRCMOS1, 2-pin jumper) 2-pin jumper (see p.2 No.
  • Page 18: Onboard Headers And Connectors

    FDD connector (33-pin FLOPPY1) (see p.2 No. 27) the red-striped side to Pin1 Note: Make sure the red-striped side of the cable is plugged into Pin1 side of the connector. Primary IDE connector (Blue) (39-pin IDE1, see p.2 No. 10)
  • Page 19 USB 2.0 Header ASRock 8CH I/O accommo- dates 4 default USB 2.0 ports. If (9-pin USB67) those USB 2.0 ports on the I/O (see p.2 No. 22) panel are not sufficient, this USB 2.0 header is available to...
  • Page 20 CPU Fan Connector Please connect a CPU fan cable to this connector and match (4-pin CPU_FAN1) the black wire to the ground pin. (see p.2 No. 5) ATX Power Connector Please connect an ATX power supply to this connector.
  • Page 21 Before installing SATAII hard disk to your computer, please carefully read below SATAII hard disk setup guide. Some default setting of SATAII hard disks may not be at SATAII mode, which operate with the best performance. In order to enable SATAII function, please follow the below instruction with different vendors to correctly adjust your SATAII hard disk to SATAII mode in advance;...
  • Page 22 STEP 2: Connect the SATA power cable to the SATA / SATAII hard disk. STEP 3: Connect one end of the SATA data cable to the motherboard’s SATA / SATAII connector. STEP 4: Connect the other end of the SATA data cable to the SATA / SATAII hard disk. 2.12 Hot Plug F 2.12 Hot Plug F...
  • Page 23: Bios Information

    Windows operating systems: 98 SE/ ME / 2000 / XP / XP 64-bit. The Support CD that came with the motherboard contains necessary drivers and useful utilities that will enhance motherboard features. To begin using the Support CD, insert the CD into your CD-ROM drive. It will display the Main Menu automatically if “AUTORUN”...
  • Page 24 ASRock 775i915P-SATA2 Motherboard...
  • Page 25 ® ® ® ASRock 775i915P-SATA2 Motherboard...
  • Page 26 ® ® ASRock 775i915P-SATA2 Motherboard...
  • Page 27 ASRock 775i915P-SATA2 Motherboard...
  • Page 28 ASRock 775i915P-SATA2 Motherboard...
  • Page 29 ASRock 775i915P-SATA2 Motherboard...
  • Page 30 ASRock 775i915P-SATA2 Motherboard...
  • Page 31 ASRock 775i915P-SATA2 Motherboard...
  • Page 32 DDRII_1 DDRII_2 DDR1 DDRII_3 DDRII_4 DDR2 ASRock 775i915P-SATA2 Motherboard...
  • Page 33 ASRock 775i915P-SATA2 Motherboard...
  • Page 34 “ ” ASRock 775i915P-SATA2 Motherboard...
  • Page 35 ASRock 775i915P-SATA2 Motherboard...
  • Page 36 Driver ATi Driver ASRock 775i915P-SATA2 Motherboard...
  • Page 37 ASRock 775i915P-SATA2 Motherboard...
  • Page 38 SATA II_1 ASRock 775i915P-SATA2 Motherboard...
  • Page 39 ASRock 775i915P-SATA2 Motherboard...
  • Page 40 SLI/XFIRE_POWER1 ASRock 775i915P-SATA2 Motherboard...
  • Page 41 ASRock 775i915P-SATA2 Motherboard...
  • Page 42 ASRock 775i915P-SATA2 Motherboard...
  • Page 43 ® ® “LGA 775 CPU Installation Live Demo” ASRock 775i915P-SATA2 Motherboard...
  • Page 44 Wir danken Ihnen für den Kauf des ASRock 775i915P-SATA2 Motherboard, ein zuverlässiges Produkt, welches unter den ständigen, strengen Qualitätskontrollen von ASRock gefertigt wurde. Es bietet Ihnen exzellente Leistung und robustes Design, gemäß der Verpflichtung von ASRock zu Qualität und Halbarkeit.
  • Page 45: Spezifikationen

    Spezifikationen Spezifikationen Spezifikationen Spezifikationen Plattform - ATX-Formfaktor: 30.5 cm x 24.4 cm; 12.0 Zoll x 9.6 Zoll - Unterstützt 775-Pin Socket für Intel Pentium 4 / Celeron D Prozessor (in 775-land LGA Paket) - FSB 800/533 MHz - Unterstützt EM64T-CPU - Unterstützt Hyper-Threading-Technologie...
  • Page 46 - Anschluss für Audio auf der Gehäusevorderseite - 2 x USB 2.0-Anschlüsse (Unterstützung 4 zusätzlicher USB 2.0-Anschlüsse) (siehe VORSICHT 7) BIOS - 2Mb AMI BIOS - AMI legal BIOS mit Unterstützung für “Plug and Play” - ACPI 1.1-Weckfunktionen - JumperFree-Modus Support-CD - Treiber, Dienstprogramme, Antivirussoftware Hardware Monitor - Überwachung der CPU-Temperatur...
  • Page 47 Shutdown durch. Bevor Sie das System neu starten, prüfen Sie bitte, ob der CPU-Lüfter am Motherboard richtig funktioniert, und stecken Sie bitte den Stromkabelstecker aus und dann wieder ein. Um die Wärmeableitung zu verbessern, bitte nicht vergessen, etwas Wärmeleitpaste zwischen CPU und Kühlkörper zu sprühen.
  • Page 48 Bevor Sie die 775-Pin CPU in den Sockel sitzen, prüfen Sie bitte, ob die CPU-Oberfläche sauber ist und keine der Kontakte verbogen sind. Setzen Sie die CPU nicht mit Gewalt in den Sockel, dies kann die CPU schwer beschädigen. ASRock 775i915P-SATA2 Motherboard...
  • Page 49 Pin1 Orientierungskerbe Orientierungskerbe 775-Pin Sockel 775-Pin CPU Um die CPU ordnungsgemäß einsetzen zu können, richten Sie die zwei Orientierungskerben der CPU mit den beiden Markierungen des Sockels aus. Schritt 2-3. Drücken Sie die CPU vorsichtig in vertikaler Richtung in den Sockel.
  • Page 50 Kappe drücken, um ein Entfernen zu erleichtern. 1. Verwenden Sie beim Entfernen die Kappenlasche und vermeiden Sie ein Abreißen der PnP-Kappe. 2. Diese Kappe muss angebracht werden, falls Sie das Motherboard zur Reparatur bringen. Schritt 4. Sockel schließen: Schritt 4-1. Drehen Sie die Ladeplatte auf den Kühlkörper (IHS).
  • Page 51 Installation des CPU-Lüfters und Kühlkörpers Für Installationshinweise, siehe Betriebsanleitung Ihres CPU-Lüfters und Kühlkörpers. Unten stehend ein Beispiel zur Installation eines Kühlkörpers für den 775-Pin CPU. Schritt 1. Geben Sie Wärmeleitmaterial auf die Mitte (Tragen Sie Wärmeleitmaterial auf. ) des IHS, auf die Sockeloberfläche.
  • Page 52 Sie müssen ein identisches DDRII DIMM-Paar unter Dual Channel A (DDRII_1 und DDRII_3; gelbe Steckplätze; siehe S. 2, Nr. 6) oder ein identisches DDRII DIMM-Paar unter Dual Channel B (DDRII_2 und DDRII_4; orange Steckplätze; siehe S. 2, Nr. 7) installieren, damit die Dual Channel-Speichertechnologie aktiviert werden kann. Sie können auch ein identisches DDR DIMM-Paar unter Dual Channel (DDR1 und DDR2;...
  • Page 53 4. Es ist nicht zulässig, DDR in einen DDRII Steckplatz oder DDRII in einen DDR Steckplatz zu installieren; andernfalls könnten Motherboard und DIMMs beschädigt werden. 5. DDR- und DDRII-RAM dürfen nicht gleichzeitig in diesem Motherboard installiert werden; andernfalls kann es zu Schäden an Motherboard und DIMMs kommen.
  • Page 54 Express-Slots): Express-Slots): Express-Slots): Express-Slots): Es stehen 3 PCI- , 2 PCI Express - und 1 AGI Express -Slot auf dem 775i915P-SATA2 Motherboard zur Verfügung. PCI-Slots: PCI-Slots werden zur Installation von Erweiterungskarten mit dem 32bit PCI-Interface genutzt. PCI Express-Slots: PCIE1 (PCIE x16-Steckplatz) wird für PCI Express- Grafikkarten mit x16-Busbreite verwendet.
  • Page 55 AGI Express-Steckplatz und SATA II funktionieren. Per Vorgabe sind PCIE2-Steckplatz (PCIE x 1), AGI Express-Steckplatz (nur PCI Express x 1) und SATA II aktiviert. Mit Hilfe der Steckbrücken („Jumper“) können Sie PCIE2-Steckplatz (PCIE x 1) und SATA II deaktivieren. Dadurch bleibt lediglich der AGI Express-Steckplatz (PCI Express x 4) aktiviert.
  • Page 56 Sie bitte die nachstehenden Schritte aus, damit die Installation problemlos durchgeführt werden kann. 1. Klichen Sie mit der rechten Maustaste auf das Symbol “Arbeitsplatz” auf Ihrem Desktop, wählen Sie „Eigenschaften“ aus dem Menü. 2. Wählen Sie „Geräte-Manager“. Unter „Grafikkarten“ sollte ein „Standard Display Adapter (VGA)“...
  • Page 57: Einstellung Der Jumper

    +5VSB (Standby) zu setzen (siehe S.2 - No. 1) und die PS/2 oder USB- Weckfunktionen zu aktivieren. Hinweis: Um +5VSB nutzen zu können, muss das Netzteil auf dieser Leitung 2A oder mehr leisten können. JR1 JL1 (siehe S.2 - No. 29) Hinweis: Sind die Jumper JL1 und JR1 gesetzt funktionieren beide Audioanschlüsse, Front- und Rückseite.
  • Page 58 (33-Pin FLOPPY1) (siehe S.2 - No. 27) die rotgestreifte Seite auf Stift 1 Hinweis: Achten Sie darauf, dass die rotgestreifte Seite des Kabel mit der Stift 1- Seite des Anschlusses verbunden wird. Primärer IDE-Anschluss (blau) (39-pin IDE1, siehe S.2 - No. 10)
  • Page 59 SATA II_1 Massenspeichergeräte. Die aktuelle SATAII-Schnittstelle ermöglicht eine Datenübertragungsrate bis 3,0 Gb/s. Es wird empfohlen, die SATAII-Festplatte mit dem SATAII_1-Anschluss und die SATA-Festplatte mit dem SATA1-4-Anschluss zu verbinden. Serial ATA- (SATA-) Sie können beide Enden des Datenkabel SATA-Datenkabels entweder mit...
  • Page 60 (siehe S.2 - No. 26) Interne Audio-Anschlüsse Diese ermöglichen Ihnen Stereo-Signalquellen, wie z. B. (4-Pin CD1) CD-ROM, DVD-ROM, TV-Tuner (CD1: siehe S.2 - No. 37) oder MPEG-Karten mit Ihrem System zu verbinden. Anschluss für Audio auf Dieses Interface zu einem der Gehäusevorderseite Audio-Panel auf der Vorderseite Ihres Gehäuses, ermöglicht...
  • Page 61 ATX 12V Anschluss Bitte schließen Sie an diesen Anschluss die ATX 12V (4-pin ATX12V1) Stromversorgung an. (siehe S.2 - No. 2) Sie müssen diesen Anschluss SLI/XFIRE-Stromanschluss nicht zwingend verwenden. (4-pin SLI/XFIRE_POWER1) Wenn allerdings zwei (siehe S.2 - No. 36) Grafikkarten gleichzeitig am...
  • Page 62 Anleitung zur SA A II F estplatteneinrichtung Bevor Sie eine SATA II Festplatte in Ihrem Computer installieren, lesen Sie bitte die folgende Anleitung zur SATA II Festplatteneinrichtung aufmerksam durch. Einige Standardeinstellungen von SATA II Festplatten sind möglicherweise nicht in den SATA II Modus geschaltet und arbeiten daher nicht mit optimaler Leistung.
  • Page 63 2.11 2.11 2.11 Serial A Serial A Serial A Serial AT T T T T A A A A A - (SA - (SA - (SA - (SAT T T T T A)/Serial A A)/Serial A A)/Serial AT T T T T AII- (SA...
  • Page 64 CD information Dieses Motherboard unterstützt eine Reiche von Microsoft Windows Betriebssystemen: 98 SE / ME / 2000 / XP/ XP 64-Bit. Die Ihrem Motherboard beigefügte Support-CD enthält hilfreiche Software, Treiber und Hilfsprogramme, mit denen Sie die Funktionen Ihres Motherboards verbessern können Legen Sie die Support-CD zunächst in Ihr CD-ROM-Laufwerk ein.
  • Page 65: Contenu Du Paquet

    être trouvées dans le manuel l’utilisateur qui se trouve sur le CD d’assistance. Les spécifications de la carte mère et le BIOS ayant pu être mis à jour, le contenu de ce manuel est sujet à des changements sans notification.
  • Page 66: Spécifications

    - Socket 775 broches prenant en charge les processeurs Pentium 4 / Celeron D (dans le paquet 775-land LGA) - FSB 800/533 MHz - Prise en charge de la technologie EM64T par le CPU - Prise en charge de la technologie Hyper-Threading (voir ATTENTION 1) ®...
  • Page 67 - br. 4 connecteur d’alimentation 12V ATX - Connecteur d’alimentation SLI/XFIRE - Connecteurs audio internes - Connecteur audio panneau avant - 2 x En-tête USB 2.0 (prendre en charge 4 ports USB 2.0 supplémentaires) (voir ATTENTION 7) BIOS - 2Mb BIOS AMI - BIOS AMI - Support du “Plug and Play”...
  • Page 68 Pour améliorer la dissipation de la chaleur, n’oubliez pas de mettre de la pâte thermique entre le CPU le dissipateur lors de l’installation du PC.
  • Page 69 Vue d’ensemble du socket 775 broches Avant d’insérer le processeur 775 broches dans le socket, veuillez vérifier que la surface du processeur est bien propre, et qu’il n’y a aucune broche tordue sur le socket. Si c’est le cas, ne forcez pas pour insérer le processeur dans le socket.
  • Page 70 1. Il est recommandé d’utiliser la languette du capuchon ; évitez de faire sortir le capuchon PnP. 2. Ce capuchon doit être mis en place si vous renvoyez la carte mère pour service après vente. Etape 4. Refermez le socle : Etape 4-1.
  • Page 71 Répétez l’opération avec les autres attaches. Si vous enfoncez les attaches sans les faire tourner dans le sens des aiguilles d’une montre, le dissipateur thermique ne sera pas fixé sur la carte mère.
  • Page 72 être activée. Vous pouvez aussi installer une paire DIMM DDR identique dans le canal double (DDR1 et DDR2; fentes bleues; voir p.2 No. 8) afin que la technologie de mémoire à canal double puisse être activée. Cette carte mère vous permet aussi d’installer quatrel DIMM DDRII pour la configuration à...
  • Page 73 Installation d’un module DIMM Installation d’un module DIMM Installation d’un module DIMM Ayez bien le soin de débrancher l’alimentation avant d’ajouter ou de retirer des modules DIMM ou les composants du système. Etape 1. Déverrouillez un connecteur DIMM en poussant les taquets de maintien vers l’extérieur.
  • Page 74: Installation D'une Carte D'extension

    (Slots PCI, PCI Express et AGI Express) (Slots PCI, PCI Express et AGI Express) Il y a 3 slots PCI , 2 slots PCI Express et 1 slot AGI Express sur les cartes mères 775i915P-SATA2. Slots PCI: Les slots PCI sont utilisés pour installer des cartes d’extension dotées d’une interface PCI 32 bits.
  • Page 75 Express x 1) et SATA II. Vous pouvez aussi ajuster les cavaliers pour désactiver la fente PCIE2 (PCIE x 1) et SATA II. Alors seulement la fente AGI Express (PCI Express x 4) sera activée. En d’autres mots, vous êtes capable d’ajuster les cavaliers pour jouir de l’avantage de la caractéristique de Dual Graphic.
  • Page 76 Windows 98 SE / ME pour Windows 98 SE / ME Si votre système est Windows 98 / ME et veut installer le pilote de carte VGA PCIE. Veuillez suivre les étapes suivantes pour une installation de pilote correcte.
  • Page 77 2.7 “Surround Display” 2.7 “Surround Display” 2.7 “Surround Display” Cette carte mère supporte la mise à niveau de Surround Display. Avec la carte externe d’extension VGA PCI Express, vous pouvez facilement jouir des avantages de la caractéristique de l’affichage Surround.
  • Page 78 (FLOPPY1 br. 33) (voir p.2 No. 27) le côté avec fil rouge côté Broche1 Note: Assurez-vous que le côté avec fil rouge du câble est bien branché sur le côté Broche1 du connecteur. Connecteur IDE primaire (bleu) (IDE1 br. 39, voir p.2 No. 10)
  • Page 79 3,0 Gb/s. Il est recommandé de connecter le disque dur SATAII sur le connecteur SATAII_1 et le disque dur SATA sur le connecteur SATA1-4. Câble de données L’une des deux extrémités du Série ATA (SATA)
  • Page 80 En-tête USB 2.0 L’ASRock 8CH I/O (E/S ASRock 8CH) vous fournit 4 ports USB (USB_45 br.9) 2.0 par défaut situés sur le (voir p.2 No. 24) panneau arrière. Si les ports USB arrières ne sont pas suffisants, cet en-tête USB 2.0 (USB_45) est capable de supporter 2 ports USB 2.0...
  • Page 81 Veuillez connecter le câble de de l’UC ventilateur d’UC sur ce connecteur et brancher le fil (CPU_FAN1 br. 4) noir sur la broche de terre. (voir p.2 No. 5) En-tête d’alimentation ATX Veuillez connecter l’unité d’alimentation ATX sur cet en- (ATXPWR1 br.
  • Page 82 SATAII. Western Digital Pour activer SATA 1.5 Go/s, raccourcir les broches 5 et 6. D’autre part, si vous voulez activer SATAII 3.0 Go/s, enlever le cavalier entre la broche 5 et la broche 6. SAMSUNG Pour activer SATA 1.5 Go/s, raccourcir les broches 3 et 4.
  • Page 83 La Carte Mère 775i915P-SATA2 supporte la fonction “Hot Plug” pour les périphériques SATAII. (Avec cette carte mère, seulement le jeu de puce JMicron JMB360 supporte la fonction « Connexion à chaud » ; le jeu de puce Intel ICH6 ne supporte pas la fonction « Connexion à chaud ») REMARQUE Qu’est-ce que la fonction «...
  • Page 84 Cette carte mère supporte divers systèmes d’exploitation Microsoft Windows: 98 SE / ME / 2000 / XP / XP 64-bit. Le CD technique livré avec cette carte mère contient les pilotes et les utilitaires nécessaires pour améliorer les fonctions de la carte mère.
  • Page 85: Contenuto Della Confezione

    Grazie per aver scelto una scheda madre ASRock 775i915P-SATA2, una scheda madre affidabile prodotta secondo i severi criteri di qualità ASRock. Le prestazioni eccellenti e il design robusto si conformano all’impegno di ASRock nella ricerca della qualità e della resistenza.
  • Page 86 Specifiche Specifiche Specifiche Specifiche Piattaforma - ATX Form Factor: 12.0-in x 9.6-in, 30.5 cm x 24.4 cm Processore - Socket 775-Pin in grado di supportare processori Intel Pentium 4 / Celeron D (nella confezione 775-land LGA) - FSB 800/533 MHz...
  • Page 87 - 1 x connettore Serial ATAII 3.0Gb/s di JMicron JMB360 (PCIE x 1 interfaccia) (Supporta la funzione “Hot plug”) - 1 x connettori ATA100 IDE (supporta fino a 2 dispositivi IDE) - 1 x porta Floppy - Connettore ventolina CPU/telaio...
  • Page 88 Questa scheda madre supporta l’ingresso stereo e mono per il microfono. Questa scheda madre supporta le modalità 2 canali, 4 canali, 6 canali e 8 canali per l’uscita audio. Controllare la tavola a pagina 3 per eseguire il collegamento appropriato.
  • Page 89: Installazione

    3. Tenere i componenti per i bordi e non toccare i ICs. 4. Ogni volta che si disinstalla un componente, appoggiarlo su un tappetino antistatico messo a terra o depositarlo nella borsa data in dotazione con il componente.
  • Page 90 Vista del socket 775-Pin Prima da inserire la CPU da 775-Pin nel socket, verificare che la superficie della CPU sia pulita e che non ci siano pin piegati nel socket. Non forzare l’inserimento della CPU nel socket se ci sono pin piegati.
  • Page 91 1. Si raccomanda di utilizzare la linguetta del cappuccio per la manipolazione ed evitare di far saltare via il cappuccio PnP. 2. Questo tappo deve essere inserito se se la scheda madre deve essere restituita per l’assistenza. Fase 4. Chiudere la presa: Fase 4-1.
  • Page 92 Ripetere la stessa operazione con gli altri fastener. Se si premono i fastener verso il basso, senza ruotarli in senso orario, il dissipatore non viene fissato bene alla scheda madre Fase 5. Collegare il cavo di alimentazione della ventola al connettore ventola della CPU sulla scheda madre.
  • Page 93 DIMM DDRII nel canale doppio A (DDRII_1 e DDRII_3; slot gialli, vedere pag. 2 n. 6) o una coppia identica di DIMM DDRII nel canale doppio B (DDRII_2 e DDRII_4; slot arancio; vedere pag. 2 n. 7), in maniera tale che la tecnologia di memoria a doppio canale possa essere attivata.
  • Page 94 Sbloccare lo slot DIMM premendo i fermi che lo trattengono verso l’esterno. Step 2. Allineare una DIMM sullo slot così che il pettine della DIMM combaci con la sua sede sullo slot. La DIMM può essere montata correttamente soltanto con un orientamento.
  • Page 95 AGI Express) AGI Express) AGI Express) AGI Express) Esistono 3 slot PCI, 2 slot PCI Express e 1 slot AGI Express su entrambe le schede madri 775i915P-SATA2. Slot PCI: Sono utilizzati per installare schede di espansione con Interfaccia PCI a 32-bit.
  • Page 96 SATA II. Il valore predefinito di questa funzione è di abilitare l’alloggiamento PCIE2 (PCIE x 1), AGI Express (solo PCI Express x 1) e SATA II. Si possono anche regolare i jumper per disabilitare l’alloggiamento PCIE2 (PCIE x 1) e SATA II. Quindi, sarà...
  • Page 97 PCIE per Windows 98 SE/ME PCIE per Windows 98 SE/ME Se il sistema è Windows 98/ME e si desidera installare il driver della scheda VGA PCIE, seguire le istruzioni in basso per effettuare l’installazione correttamente. 1. Cliccare su “Risorse del computer” sul desktop e cliccare con il tasto destro del mouse su “Proprietà”.
  • Page 98 Nota: Per selezionare +5VSB, si richiedono almeno 2 Ampere e il consumo di corrente in standby sarà maggiore. JR1 JL1 (vedi p.2 Nr. 29) Nota: Se i jumper JL1 e JR1 sono chiusi, funzionano sia i connettori audio frontali che posteriori. Resettare la CMOS (CLRCMOS1, jumper a 2 pin) jumper a 2 pin (vedi p.2 Nr.
  • Page 99 (33-pin FLOPPY1) Lato del Pin1 con la striscia rossa (vedi p.2 Nr. 27) Nota: Assicurarsi che il lato del cavo con la striscia rossa sia inserito nel lato Pin1 del connettore. Connettore IDE primario (blu) (39-pin IDE1, vedi p.2 Nr. 10)
  • Page 100 Collettore USB 2.0 Il dispositivo ASRock 8CH I/O mette a vostra disposizione 4 (9-pin USB67) porte USB 2.0 di default sul (vedi p.2 No. 22) pannello posteriore. Se le porte USB posteriori non sono sufficienti, è disponibile questo collettore USB 2.0 (USB67) che può...
  • Page 101 Connettore audio sul È un’interfaccia per il cavo del pannello frontale pannello audio. Che consente connessione facile e controllo (9-pin AUDIO1) dei dispositivi audio. (vedi p.2 Nr. 30) Collettore pannello di sistema Questo collettore accomoda diverse funzioni di sistema (9-pin PANEL1) pannello frontale.
  • Page 102 ATA all’altra. Visitare il sito web HITACHI per i dettagli: http://www.hitachigst.com/hdd/support/download.htm Gli esempi di cui sopra sono solo per riferimento. Per dischi rigidi SATAII di diversi produttori, i metodi di impostazione dei pin del jumper possono non essere gli stessi. Visitare i siti web dei produttori per gli aggiornamenti.
  • Page 103 AII) Questa scheda madre adotta il chipset JMicron JMB360 che supporta dischi rigidi Serial ATAII (SATAII) ed il chipset Intel ICH6 South Bridge che supporta dischi rigidi Serial ATA (SATA). Sulla scheda madre possono essere installati dischi rigidi SATA/SATAII come supporti d’archiviazione interna. Questa sezione illustra l’installazione dei dischi rigidi SATASATAII.
  • Page 104 Questa scheda madre supporta vari sistemi operativi Microsoft Windows: 98 SE / ME / 2000 / XP / XP 64 bit. Il CD di supporto a corredo della scheda madre contiene i driver e utilità necessari a potenziare le caratteristiche della scheda.
  • Page 105: Contenido De La Caja

    ASRock. Esta Guía rápida de instalación contiene una introducción a la placa base y una guía de instalación paso a paso. Puede encontrar una información más detallada sobre la placa base en el manual de usuario incluido en el CD de soporte.
  • Page 106 Especificación Especificación Especificación Plataforma - Factor forma ATX: 30,5 cm x 24,4 cm, 12,0” x 9,6” Procesador - Socket de 775 agujas compatible con procesador Intel Pentium 4 / Celeron D (en paquete LGA para 775 agujas) - FSB 800/533 MHz - Admite CPU EM64T - Admite tecnología Hyper Threading (ver ATENCIÓN 1)
  • Page 107 - 4-pin conector de ATX 12V power - Conector de SLI/XFIRE power - Conector de Audio Interno - Conector de audio de panel frontal - 2 x Cabezal USB 2.0 (admite 4 puertos USB 2.0 adicionales) (vea ATENCIÓN 7) BIOS - 2Mb AMI BIOS - AMI legal BIOS - Soporta “Plug and Play”...
  • Page 108 PC. Si instala la tarjeta VGA PCI Express en la ranura AGI Express, la ranura PCIE2 (PCIE x 1) y las funciones de SATAII se desactivarán. Para obtener información sobre las tarjetas VGA PCI Express compatibles, consulte la “Lista de tarjetas...
  • Page 109: Instalación

    4. Ponga cualquier componente deslocalizado sobre la bolsa anti- estástica que viene con la placa madre. 5. Al colocar los tornillos en sus agujeros para fijar la placa madre en el chasis, no los apriete demasiado. Eso podría dañar la placa madre.
  • Page 110 Socket de 775 agujas CPU de 775 agujas Para insertarla correctamente, asegúrese de que las dos muescas de orientación de la CPU coinciden con las teclas de alineación del socket. Step 2-3. Coloque con cuidado la CPU en el socket con un movimiento totalmente vertical.
  • Page 111 Para una correcta instalación, consulte los manuales de instrucciones del ventilador y el disipador de la CPU. A continuación se ofrece un ejemplo para ilustrar la instalación del disipador para la CPU de 775 agujas. (Aplique el material termal de interfaz) Paso 1.
  • Page 112 Repita el proceso con los cierres restantes. Si presiona los cierres sin girarlos en el sentido de las agujas del reloj, el disipador no se podrá fijar a la placa madre. Paso 5. Conecte el cabezal del ventilador con el conector del ventilador de la CPU en la placa madre.
  • Page 113: Instalación De Memoria

    Canal dual A (DDRII_1 y DDRII_3, ranuras amarillas, consulte la página 2 Nº6) o un par DIMM DDRII idéntico en el Canal dual B (DDRII_2 y DDRII_4, ranuras naranjas, consulte la página 2 Nº7), de forma que pueda activarse la Tecnología de memoria de canal dual.
  • Page 114 Asegúrese de desconectar la fuente de alimentación antes de añadir o retirar módulos DIMM o componentes del sistema. Paso 1. Empuje los clips blancos de retención por el extremo de cada lado de la ranura de memoria. Paso 2. Encaje la muesca del DIMM hacia la cumbrera de la ranura.
  • Page 115: Ranuras De Expansión

    Express) Express) Express) Express) Hay 3 ranuras PCI, 2 ranura PCI Express y 1 ranura AGI Express sobre las placas mardres 775i915P-SATA2. Ranuras PCI: Para instalar tarjetas de expansión que tienen 32-bit Interface PCI. Ranura PCI Express: PCIE1 (ranura PCIE x16) se utiliza para tarjetas PCI Ex press con tarjetas gráficas con una anchura de 16...
  • Page 116 VGA complementarias en esta placa base, podrá elegir dos formar para decidir la función de la ranura PCIE2 (PCIE x 1), la ranura AGI Express y SATA II. El valor predeterminado de esta función es activar la ranura PCIE2 (PCIE x 1), la ranura AGI Express (sólo PCI Express x 1), y SATA II.
  • Page 117 PCIE para Windows 98 SE / ME PCIE para Windows 98 SE / ME Si su sistema es Windows 98 / ME y desea instalar el controlador de tarjeta VGA PCIE. Siga estos pasos para realizar una instalación adecuada. 1. Haga clic en “Mi PC” en el escritorio haga clic con el botón derecho en “Propiedades”.
  • Page 118 Atención: Para elegir +5VSB, se necesita corriente mas que 2 Amp proveida por la fuente de electricidad. JR1 JL1 (vea p.2, N. 29) Atención: Si los puentes JL1 y JR1 son cortos, tanto el conector de audio del panel frontal como del panel posterior pueden funcionar. Limpiar CMOS (CLRCMOS1, jumper de 2 pins) jumper de 2 pins (vea p.2, N.
  • Page 119 (vea p.2, N. 27) la banda roja debe quedar en el mismo lado que el contacto 1 Atención: Asegúrese que la banda roja del cable queda situado en el mismo lado que el contacto 1 de la conexión. IDE conector primario (azul) (39-pin IDE1, vea p.2, N.
  • Page 120 (vea p.2, N. 26) wireless opcional. Conector de audio interno Permite recepción de input audio de fuente sónica como CD- (4-pin CD1) ROM, DVD-ROM, TV tuner, o (CD1: vea p. 2, N. 37) tarjeta MPEG. 1 2 0...
  • Page 121 (vea p.2, N. 20) Conector del ventilador Conecte el cable del ventilador de la CPU de la CPU a este conector y haga coincidir el cable negro (4-pin CPU_FAN1) con el conector de tierra. (vea p.2, N. 5) Cabezal de alimentación ATX...
  • Page 122 Conector de alimentaciónSLI/XFIRE (4-pin SLI/XFIRE_POWER1) conector. Conéctelo al conector (vea p.2, N. 36) de alimentación del disco duro cuando se conecten dos tarjetas gráficas a esta placa base al SLI/XFIRE_POWER1 mismo tiempo. 1 2 2 1 2 2 1 2 2...
  • Page 123 Los ejemplos anteriores son sólo para referencia. Para diferentes productos de disco duro SATAII de diferentes proveedores, los métodos de configuración de la patilla de puente pueden no ser los mismos. Por favor visite el sitio Web de los proveedores para obtener las actualizaciones.
  • Page 124 PASO 2: Conecte el cable de alimentación SATA al disco duro SATA/SATAII. PASO 3: Conecte un extremo del cable de datos SATA al conector SATA/SATAII de la placa base. PASO 4: Conecte el otro extremo del cable de datos SATA al disco duro SATA/ SATAII. 2.12 2.12...
  • Page 125 Esta placa-base soporta diversos tipos de sistema operativo Windows: 98SE / ME / 2000 / XP / XP 64 bits El CD de instalación que acompaña la placa-base trae todos los drivers y programas utilitarios para instalar y configurar la placa-base.

Table of Contents