Manual Setup (Basic Settings) - NETGEAR DGND3800B User Manual

N600 Wireless Dual Band Gigabit VDSL2 Modem Router DGND3800B
You are prompted to change the administrator password:
Enter the current password, and then enter the new password and click Next.
5.
With automatic Internet detection, the Setup Wizard searches your Internet connection
for servers and protocols to determine your ISP configuration.
The Setup Wizard cannot detect a Point-to-Point Tunneling Protocol
Note:
(PPTP) connection. If your ISP uses PPTP, you have to set your
Internet connection through the screen described in
(Basic Settings)

Manual Setup (Basic Settings)

The Basic Settings screen displays when you select No. I want to configure the Router myself
in the Setup Wizard and is also available from the router menus. It is where you view or
change ISP information. The fields that display vary depending on whether or not your
Internet connection requires a login.
Check that the country and language are set as described
Note:
Wizard

To set up the basic settings manually:
Select Set Up > Basic Settings and select Yes or No depending on whether or not
1.
your ISP requires a login.
Yes. Select the encapsulation method and enter the login name. If you want to
•
change the login time-out, enter a new value in minutes.
No. Enter the account and domain names, as needed.
•
on page 22.
on page 21 before proceeding with the manual setup.
Router Internet Setup
Manual Setup
22
Setup