NETGEAR DGND3800B User Manual page 26

N600 Wireless Dual Band Gigabit VDSL2 Modem Router DGND3800B

To enter a multiplexing method or VPI/VCI number (if provided by the ISP):
Select Setup > ADSL Settings to display the following screen:
1.
In the Internet Service Provider drop-down list, select your ISP.
2.
Specify the transfer mode.
3.
The transfer mode can be PTM (Packet Transfer Mode) or ATM (Asynchronous Transfer
Mode). The VDSL2 interface supports PTM. PTM transports packets (IP, PPP, Ethernet,
MPLS, and so on) over DSL links as an alternative to using ATM. PTM is based on the
Ethernet in the First Mile (EFM) IEEE802.3ah standard.
Select the DSL mode. The available settings depend on the selection in the Transfer Mode
4.
field.
If the Transfer Mode is ATM, the DSL mode can be Auto, ADSL, ADSL2, or ADSL2+.
•
If the transfer mode is PTM, the DSL mode is VDSL (Very-high-bit-rate digital
•
subscriber line).
In the Multiplexing Method drop-down list, select LLC-based or VC-based.
5.
For the VPI, type a number between 0 and 255. The default is 8 for the U.S. version, 0 for
6.
the worldwide version, and 1 for the German version.
For the VCI, type a number between 32 and 65535. The default is 35 for the U.S. version,
7.
38 for the worldwide version, and 32 for the German version.
Click Apply.
8.
Router Internet Setup
26