Automatic Firmware Checking On - NETGEAR DGND3800B User Manual

N600 Wireless Dual Band Gigabit VDSL2 Modem Router DGND3800B

Automatic Firmware Checking On

When automatic firmware checking is on, the modem router performs the check and notifies
you if an upgrade is available or not as shown here.
Figure 9. Firmware check notification screens

To turn on automatic firmware checking:
Click Yes to allow the modem router to download and install the new firmware. The
1.
upgrade process could take a few minutes. When the upload is complete, your modem
router restarts.
Go to the DGND3800B support page at
2.
firmware release notes to determine whether you need to reconfigure the modem router
after upgrading.
If you get a "Firmware needs to be reloaded" message, it means a
Note:
problem has been detected with the router's firmware. Follow the
prompts to correct the problem, or see
Reloaded
http://www.netgear.com/support
on page 142 for a description of the steps.
Network Maintenance
56
Firmware Needs to Be
and read the new