Manual Setup (Basic Settings) - NETGEAR DGN2200v3 User Manual

If you selected Yes, click Next.
3.
With automatic Internet detection, the Setup Wizard searches your Internet connection
for servers and protocols to determine your ISP configuration.
The Setup Wizard cannot detect a Point-to-Point Tunneling Protocol
Note:
(PPTP) connection. If your ISP uses PPTP, you have to set your
Internet connection through the screen described in
(Basic Settings)

Manual Setup (Basic Settings)

The Basic Settings screen displays when you select No. I want to configure the Router
myself in the Setup Wizard and is also available from the modem router menu. It is where
you view or change ISP information. The fields that display vary depending on whether or not
your Internet connection requires a login.

To use Basic Settings to specify your Internet settings manually:
Check that the country is set as described
Note:
before proceeding with the manual setup.
Select Set Up > Basic Settings, and select Yes or No depending on whether or not
1.
your ISP requires a login.
fields in the Basic Settings screen. Note that which fields appear in this screen depends
on whether or not an ISP login is required.
screen.
Yes. Select the encapsulation method and enter the login name. If you want to
•
change the login time-out, enter a new value in minutes.
No. Enter the account and domain names, as needed.
•
Enter the settings for the IP address and DNS server. The default DSL settings usually work
2.
fine. If you have problems with your connection, check the DSL settings, and see
on page 26 for more information.
Settings
If no login is required, you can specify the MAC Address setting.
3.
Click Apply to save your settings.
4.
N300 Wireless ADSL2+ Modem Router DGN2200v3
on page 23.
Figure , The following descriptions explain all of the possible
Modem Router Setup
23
Manual Setup
on page 22
Setup Wizard
shows both forms of the Basic Settings
ADSL