NETGEAR DGN2200v3 User Manual page 15

N300 Wireless ADSL2+ Modem Router DGN2200v3
2. Add power to the modem router.
2
a. Connect the power adapter to the router and plug the power adapter into an outlet.
b. Wait for the WiFi LED on the front panel to turn on. If none of the LEDs on the front
panel are on, press the Power On/Off button on the rear panel of the modem router.
Connect a computer.
3.
You can use an Ethernet cable or connect wirelessly.
Use the yellow Ethernet cable to connect your computer to an Ethernet port on your
•
router.
Or, connect wirelessly by using the preset wireless security settings located on the
•
label on the bottom of the router.
Open a browser.
4.
4
Hardware Setup
15
3