Related Manuals for Eteros Mobius M9 SORTER
Summary of Contents for Eteros Mobius M9 SORTER
- Page 1 M9 SORTER WITH AUTOMATIC TENSIONING USER GUIDE v2.1 ©2024 Eteros Technologies inc. All rights reserved. | mobiustrimmer.com...
- Page 2 WARRANTY..................................7 INITIAL SETUP................................... 8 ASSEMBLY & INSPECTION..........................8 REMOVE AND INSTALL BELTS AND ROLLERS................. 10 INITIAL SETUP..................................13 GET TO KNOW YOUR MOBIUS M9 SORTER..................13 WHAT'S IN THE BOX............................15 GENERAL OPERATION............................16 CLEANING & MAINTENANCE..........................21 CLEANING MODE..............................21 CLEANING...................................21...
- Page 3 ETEROS TECHNOLOGIES recognizes that our equipment can be used for processing herbs, hops, flowers and many other products. It is not the responsibility of ETEROS TECHNOLOGIES to confirm alternative applications for our equipment.
- Page 4 Results of inspection activity should be documented. ETEROS TECHNOLOGIES makes every effort to ensure the M9 SORTER is compliant with all current safety standards. It is the responsibility of the owner to ensure all municipal, provincial, state, county, territorial, and federal codes, regulations and standards have been met in each working location.
- Page 5 WEAR PROPER APPAREL Do not wear loose clothing, gloves, neckties, rings, bracelets, or other jewelry that may get caught in moving parts. Non-slip footwear is recommended. Wear a protective hair covering to contain long hair. MOBIUS M9 SORTER USER GUIDE 4...
- Page 6 Any damaged part including guards should be properly repaired or replaced. ALWAYS WEAR EYE PROTECTION Safety goggles can protect your eyes from fast-moving debris. ALWAYS WEAR EAR PROTECTION Wear ear muffs or earplugs when operating loud machinery. MOBIUS M9 SORTER USER GUIDE 5...
- Page 7 SERVICES & REPAIRS Repairs must be carried out in consultation with Eteros Technologies' Technical Support department. Only original equipment manufacturer (OEM) Mobius parts are to be used for repairs. Should the need arise, please notify us: ETEROS TECHNOLOGIES 26 Industrial Ave. Carleton Place Ontario, Canada K7C 3T2 www.eteros.com...
- Page 8 WARRANTY Thank you for purchasing Mobius M9 equipment from Eteros Technologies Inc. The Mobius M9 Sorter is covered by our manufacturer’s warranty as follows: ● No warranty on consumable parts, including sorter belts and roller assemblies; ● Warranty coverage for one (1) year or 1,000 operating hours, whichever occurs first, on motors, electrical components, and remainder of machine...
- Page 9 5/16 hex bit or Allen Key. Insert hopper Pins into Adjustment Blocks to lock hopper in position. MOBIUS M9 SORTER USER GUIDE 8...
- Page 10 Inspect the crate and crate contents to ensure no damage occurred during shipping. 2. Carefully remove M9 Sorter from crate. 3. The support will need to be removed on either end of the Sorter by removing the hex bolts. MOBIUS M9 SORTER USER GUIDE 9...
- Page 11 4. If the supports aren't removed, the operator will not be able to disassemble the belts off for cleaning. REMOVE AND INSTALL BELTS AND ROLLERS Unplug the machine. 2. Remove the overflow shelf and plastic side panels. MOBIUS M9 SORTER USER GUIDE 10...
- Page 12 8. To reinstall the rollers and belts, simply reverse the process: Start with the belt-tensioning assembly set to the highest position so that you have maximum slack to work with. Reposition the four rollers, ensuring the flat part MOBIUS M9 SORTER USER GUIDE 11...
- Page 13 10. Once all of the rollers and belts are in place, press the toggle switch on the touchscreen to set the belts to the “tension” position. 11. Close up the tailgate, and replace the side panels and overflow shelf. MOBIUS M9 SORTER USER GUIDE 12...
- Page 14 INITIAL SETUP GET TO KNOW YOUR MOBIUS M9 SORTER MOBIUS M9 SORTER USER GUIDE 13...
- Page 15 MOBIUS M9 SORTER USER GUIDE 14...
- Page 16 WHAT'S IN THE BOX Your M9 Arrives With The Following Components: Your Mobius M9 Sorter comes lightly assembled, tested, and ready for operation. When unpacking the device, please ensure the following items are included: M9 Sorter Machine 2. Shelf 3. Slide-Outs 4.
- Page 17 Speed adjustment goes from 0 to 11. UP / DOWN BELT Indicates the status of the belts: either CONTROL “slack” or “tension”. This switch can be toggled to automatically tension or loosen the belts. MOBIUS M9 SORTER USER GUIDE 16...
- Page 18 The speed is limited to 1/11 in this mode. This button is located on the Advanced screen. CONFIRM After toggling the Belt Control switch, press the green checkmark to confirm CANCEL that you would like the actuator to begin CONFIRM / CANCEL MOBIUS M9 SORTER USER GUIDE 17...
- Page 19 11. Adjust Hopper to allow for flow of material onto the belts. 12. Adjust Slide-Outs to desired sizing. 13. When totes are full, press the bottom left power button on the touchscreen to stop belts from turning during tote changeover. MOBIUS M9 SORTER USER GUIDE 18...
- Page 20 Sorter to route the conveyor cord inside the machine. 9. Remove the standard hopper and attach the Autofeed hopper to the Sorter. 10. Close the rear door on the Sorter and plug the sorter into a 120 V or 240 V outlet. MOBIUS M9 SORTER USER GUIDE 19...
- Page 21 13. To automatically start and stop the Autofeed with the M9, it can be toggled into Auto Mode. 14. Pressing the Conveyor Disable button will turn the conveyor off and hide all conveyor controls. MOBIUS M9 SORTER USER GUIDE 20...
- Page 22 6. Using warm or hot water (maximum 55°C/130°F), rinse down the interior of the machine, pulleys, belts, Slide-Outs, etc. The belt and pulley assemblies can also be removed for a more thorough cleaning process. MOBIUS M9 SORTER USER GUIDE 21...
- Page 23 2. Eteros recommends cleaning the inside of the machine on a regular basis. 3. Eteros recommends de-tensioning the belts when the machine is not in use.
- Page 24 HMI CONTROL TOOL-LESS DISASSEMBLY FITS THROUGH A 32" DOOR DIMENSIONS 30" W x 88″ L x 46.5" H WEIGHT 610 LBS 120 V, 1.5 A (North America) POWER REQUIREMENT 240 V, 0.7 A (international) MOBIUS M9 SORTER USER GUIDE 23...
Need help?
Do you have a question about the Mobius M9 SORTER and is the answer not in the manual?
Questions and answers