Receiving Beamed Information - palmOne Treo 650 - Smartphone 23 MB Using Manual

7. When the Beam Status dialog box appears, point the IR port on your Treo
directly at the IR port of the receiving device.
8. Wait for the Beam Status dialog box to indicate that the transfer is complete
before you continue using your Treo.

Receiving beamed information

1. Turn on your screen.
2. Point the IR port on your Treo directly at the IR port of the transmitting device
to open the Beam Status dialog box.
3. When the Beam dialog box appears, select a category for the entry.
4. Press Up to receive the beam or press Down to refuse it.
Beaming information :: 129